X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fa3m071.h;h=60158f96d4abbdcfce09d7da39c22804796fbbd4;hb=02ccab1908c405fe1449457d4a0d343784a30acb;hp=d23d2c4cc5dafd9ebb61f981e056c4d5339fd786;hpb=bd5053ffa5b8162257537bdb79ba829372423096;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index d23d2c4..60158f9 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -14,8 +14,6 @@
 
 #define CONFIG_MPC5200
 #define CONFIG_A3M071			/* A3M071 board */
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_GENERIC_BOARD
 
 #define	CONFIG_SYS_TEXT_BASE	0x01000000	/* boot low for 32 MiB boards */
 
@@ -38,20 +36,14 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	    /* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE		\
 	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_MAY_FAIL
@@ -59,11 +51,7 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_NET_RETRY_COUNT 3
-#define CONFIG_CMD_LINK_LOCAL
-#define CONFIG_LIB_RAND
 #define CONFIG_NETCONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CMD_PING
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS	/* needed for UBI */
 #define CONFIG_FLASH_CFI_MTD
@@ -84,9 +72,7 @@
 #define CONFIG_LZO			/* needed for UBI */
 #define CONFIG_RBTREE			/* needed for UBI */
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_FIT
 
 /*
  * IPB Bus clocking configuration.
@@ -99,10 +85,6 @@
 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /* maximum size of the flat tree (8K) */
 #define OF_FLAT_TREE_MAX_SIZE	8192
 
@@ -150,9 +132,9 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -242,15 +224,12 @@
  *                                                        +- 31    0 PSC1
  */
 
-
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
 
 #define CONFIG_CMDLINE_EDITING
-#define	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024
@@ -266,9 +245,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CONFIG_LOOPW
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
-
 /*
  * Various low-level settings
  */
@@ -339,9 +315,7 @@
  * Environment Configuration
  */
 
-#define CONFIG_BOOTDELAY	3	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_AUTOLOAD	"n"
 
@@ -352,8 +326,8 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define CONFIG_SYS_OS_BASE	0xfc200000
 #define CONFIG_SYS_FDT_BASE	0xfc1e0000
+#define CONFIG_SYS_FDT_SIZE	(16<<10)
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
@@ -416,18 +390,12 @@
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NOR_SUPPORT
 #define CONFIG_SPL_TEXT_BASE	0xfc000000
-#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* Place BSS for SPL near end of SDRAM */
 #define CONFIG_SPL_BSS_START_ADDR	((128 - 1) << 20)
 #define CONFIG_SPL_BSS_MAX_SIZE		(64 << 10)
 
-#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_ENV_SUPPORT
 /* Place patched DT blob (fdt) at this address */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x01800000