X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fa3m071.h;h=31348dad0f8d7ee93643af71ec0cdaf0411d8cb3;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=43d3d99bcb822653bd01b4811ff63d5615dae9ea;hpb=e20cc2ca15b5b0644f51b6e58d530d70acd2bc00;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 43d3d99..31348da 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -13,8 +13,8 @@
  */
 
 #define CONFIG_MPC5200
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_A3M071			/* ... on A3M071 board */
+#define CONFIG_A3M071			/* A3M071 board */
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0x01000000	/* boot low for 32 MiB boards */
 
@@ -44,8 +44,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_MII
@@ -84,7 +82,6 @@
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_FIT
 
 /*
  * IPB Bus clocking configuration.
@@ -97,10 +94,6 @@
 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /* maximum size of the flat tree (8K) */
 #define OF_FLAT_TREE_MAX_SIZE	8192
 
@@ -148,9 +141,9 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -245,7 +238,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"=> "
 
 #define CONFIG_CMDLINE_EDITING
 #define	CONFIG_SYS_HUSH_PARSER
@@ -265,7 +257,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_LOOPW
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
 
@@ -414,13 +405,10 @@
 /*
  * SPL related defines
  */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NOR_SUPPORT
 #define CONFIG_SPL_TEXT_BASE	0xfc000000
-#define	CONFIG_SPL_START_S_PATH	"arch/powerpc/cpu/mpc5xxx"
-#define CONFIG_SPL_LDSCRIPT	"arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
 #define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
 #define CONFIG_SPL_SERIAL_SUPPORT