X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FVoVPN-GW.h;h=1ceef113d643fccc0dd63b793fcd9157a76e3236;hb=1fc4e6f486cc1e9d2dcf0ba86e6021c3d83dce51;hp=b2d75e3c1cf1ce5da5457cd405999a9a0181e480;hpb=3405f38a15eec5092ac47efe0829f10a24491c6e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index b2d75e3..1ceef11 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -4,20 +4,7 @@
  *
  * Support for the Elmeg VoVPN Gateway Module
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -29,6 +16,8 @@
 /* define busmode: 8260 */
 #undef	CONFIG_BUSMODE_60x
 
+#define	CONFIG_SYS_TEXT_BASE		0xfff00000
+
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #ifdef	CONFIG_CLKIN_66MHz
 #define	CONFIG_8260_CLKIN		66666666	/* in Hz */
@@ -84,9 +73,6 @@
 /* don't allow baudrate change	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE
 
-/* supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * select ethernet configuration
  *
@@ -124,6 +110,11 @@
 #define CONFIG_BITBANGMII
 
 #define MDIO_PORT			1		/* Port B */
+
+#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
+					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE		MDIO_DECLARE
+
 #define CONFIG_SYS_MDIO_PIN			0x00002000	/* PB18 */
 #define CONFIG_SYS_MDC_PIN			0x00001000	/* PB19 */
 #define MDIO_ACTIVE			(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
@@ -212,7 +203,6 @@
 #define	CONFIG_SYS_LONGHELP
 
 /* monitor command prompt */
-#define	CONFIG_SYS_PROMPT			"=> "
 
 /* console i/o buffer size */
 #if defined(CONFIG_CMD_KGDB)
@@ -241,7 +231,6 @@
 #define	CONFIG_SYS_LOAD_ADDR			0x00100000
 
 /* decrementer freq: 1 ms ticks	*/
-#define	CONFIG_SYS_HZ				1000
 
 /* configure flash */
 #define CONFIG_SYS_FLASH_BASE			0xff800000
@@ -291,9 +280,8 @@
 
 /* definitions for initial stack pointer and data area (in DPRAM) */
 #define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END		0x2000
-#define CONFIG_SYS_GBL_DATA_SIZE		128
-#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE		0x2000
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -303,15 +291,11 @@
  */
 #define CONFIG_SYS_SDRAM_BASE			0x00000000
 #define CONFIG_SYS_SDRAM_SIZE			(32*1024*1024)
-#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_FLASH		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET)
 #define CONFIG_SYS_MONITOR_LEN			0x00020000
 #define CONFIG_SYS_MALLOC_LEN			0x00020000
 
-/* boot flags */
-#define BOOTFLAG_COLD			0x01	/* normal power-on */
-#define BOOTFLAG_WARM			0x02	/* software reboot */
-
 /* cache configuration */
 #define CONFIG_SYS_CACHELINE_SIZE		32      /* for MPC8260 */
 #if defined(CONFIG_CMD_KGDB)