X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM885D.h;h=eaf07410714297be94840d93a3c6d79770223170;hb=dd937b82fec0a5f1a077c207c929a1e3d465f59e;hp=598020c8676705c281f81577263a2ccc7931789d;hpb=c88eaea0a0a809884388c3a5727d960bac0b0ced;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 598020c..eaf0741 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -22,8 +22,6 @@
 
 #define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0x40000000
 
@@ -37,11 +35,9 @@
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #define CONFIG_SYS_SMC_RXBUFLEN	128
 #define CONFIG_SYS_MAXIDLE	10
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT
 
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
@@ -82,8 +78,6 @@
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
@@ -124,31 +118,15 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
 #undef CONFIG_RTC_MPC8xx		/* MPC885 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
 
 /*
  * Miscellaneous configurable options
@@ -156,7 +134,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
@@ -175,11 +152,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
 /*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
@@ -476,9 +448,6 @@
 
 #define CONFIG_ETHPRIME		"SCC"
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_HWCONFIG		1
 
 #endif	/* __CONFIG_H */