X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM885D.h;h=d75b25dc8904238540d2975ab606bf6db4df5704;hb=2d8d190c8394b43c0989cdb04a50cb48d4e1f8da;hp=76ddef54e647bb1a4d8bff99196baec74d534bf6;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 76ddef5..d75b25d 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -22,8 +22,6 @@
 
 #define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0x40000000
 
@@ -41,7 +39,6 @@
 
 #define CONFIG_BOOTCOUNT_LIMIT
 
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
@@ -82,8 +79,6 @@
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
@@ -124,7 +119,6 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
@@ -132,20 +126,12 @@
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
 
 /*
  * Miscellaneous configurable options
@@ -153,7 +139,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
@@ -172,11 +157,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
 /*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
@@ -473,9 +453,6 @@
 
 #define CONFIG_ETHPRIME		"SCC"
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_HWCONFIG		1
 
 #endif	/* __CONFIG_H */