X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM885D.h;h=5204771e00335ccb40bc468e8aa1422b2d058b4f;hb=62a22dca32b988cce5d1908e8ac9fadb139bb3e8;hp=d435819aaaa4328d1b9d81967149cc59e7782ef6;hpb=cb32ed1fc298875845f166d326a3f2704a0d5364;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index d435819..5204771 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -39,6 +39,8 @@
 #define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
@@ -217,9 +219,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -482,14 +483,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Network configuration
  */
 #define CONFIG_SCC2_ENET		/* enable ethernet on SCC2 */
@@ -506,6 +499,11 @@
 					   switching to another netwok (if the
 					   tried network is unreachable) */
 
-#define CONFIG_ETHPRIME		"SCC ETHERNET"
+#define CONFIG_ETHPRIME		"SCC"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
 
 #endif	/* __CONFIG_H */