X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM85xx.h;h=d95f75d578dfee5791294f9a3030d328af595463;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=26b12f9acff22bfce2e9b2d4bad3749ecd923032;hpb=c0296b1801fc9426d772fa75fe58458db605dfee;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 26b12f9..d95f75d 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -41,6 +41,12 @@
 #define CONFIG_E500		1	/* BOOKE e500 family		*/
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
 
+#if defined(CONFIG_TQM8548_BE)
+#define CONFIG_SYS_TEXT_BASE	0xfff80000
+#else
+#define CONFIG_SYS_TEXT_BASE	0xfffc0000
+#endif
+
 #if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
 #define CONFIG_TQM8548
 #endif
@@ -75,7 +81,7 @@
  * NAND flash support (disabled by default)
  *
  * Warning: NAND support will likely increase the U-Boot image size
- * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ * to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary.
  */
 #ifdef CONFIG_TQM8548_BE
 #define CONFIG_NAND
@@ -137,10 +143,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
-
 /*
  * DDR Setup
  */
@@ -223,7 +225,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
 
 /*
  * Note: when changing the Local Bus clock divider you have to
@@ -247,7 +249,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor	*/
 #define CONFIG_SYS_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
@@ -260,7 +262,6 @@
 #else /* !CONFIG_TQM8560 */
 
 #define CONFIG_CONS_INDEX     1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -284,6 +285,7 @@
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support */
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
 #ifdef	CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
@@ -351,8 +353,6 @@
 /* NAND FLASH */
 #ifdef CONFIG_NAND
 
-#undef CONFIG_NAND_LEGACY
-
 #define CONFIG_NAND_FSL_UPM	1
 
 #define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
@@ -567,6 +567,8 @@
 #define	CONFIG_JFFS2_NAND	1
 
 #ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nand0=TQM85xx-nand"
 #define MTDPARTS_DEFAULT	"mtdparts=TQM85xx-nand:-"
 #else
@@ -593,6 +595,7 @@
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
@@ -662,12 +665,12 @@
 				MK_STR(CONFIG_HOSTNAME)".dtb\0"
 #define CONFIG_ENV_BOOTFILE	"bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
 #define CONFIG_ENV_UBOOT		"uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
-				"uboot_addr="MK_STR(TEXT_BASE)"\0"
+				"uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_ENV_BOOTFILE						\
 	CONFIG_ENV_FDT_FILE						\
-	CONFIG_ENV_CONSDEV							\
+	CONFIG_ENV_CONSDEV						\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$serverip:$rootpath\0"				\
@@ -691,12 +694,11 @@
 	"fdt_addr=ffec0000\0"						\
 	"kernel_addr=ffd00000\0"					\
 	"ramdisk_addr=ff800000\0"					\
-	CONFIG_ENV_UBOOT							\
+	CONFIG_ENV_UBOOT						\
 	"load=tftp 100000 $uboot\0"					\
 	"update=protect off $uboot_addr +$filesize;"			\
 		"erase $uboot_addr +$filesize;"				\
-		"cp.b 100000 $uboot_addr $filesize;"			\
-		"setenv filesize;saveenv\0"				\
+		"cp.b 100000 $uboot_addr $filesize"			\
 	"upd=run load update\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"