X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM834x.h;h=f557a3c93624d151cd7347f5e94bb42711257be6;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=d713c695f7c94c8046a5490f7d7d4d3534783840;hpb=71da74743180c81c3af31108839b5d0e6a1aff87;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index d713c69..f557a3c 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -16,18 +16,6 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 
-/*
- * Local Bus LCRR
- *    LCRR:  DLL bypass, Clock divider is 8
- *
- *    for CSB = 266 MHz it gives LCB clock frequency = 33 MHz
- *
- * External Local Bus rate is
- *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
-
 /* board pre init: do not call, nothing to do */
 
 /* detect the number of flash banks */
@@ -36,9 +24,7 @@
  * DDR Setup
  */
 				/* DDR is system memory*/
-#define CONFIG_SYS_DDR_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE	0x00000000
 #define DDR_CASLAT_25		/* CASLAT set to 2.5 */
 #undef CONFIG_DDR_ECC		/* only for ECC DDR module */
 #undef CONFIG_SPD_EEPROM	/* do not use SPD EEPROM for DDR setup */
@@ -200,12 +186,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_ADDR		\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K (one sector) for env */
-#define CONFIG_ENV_SIZE		0x8000	/*  32K max size */
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO		1 /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1 /* allow baudrate change */
@@ -250,10 +230,6 @@
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		400000
 
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=tqm834x\0"						\