X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM834x.h;h=02a16ac0a66b00d6b4faf15863a87e284536e1c5;hb=d8ab58b212481b1c57947ea21aa96c4ce800d0b4;hp=9628703b317e51ffe6fbf77f19c141f80a20dfb8;hpb=2694690e285acaa34922f55f4b5ae030da60c55a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 9628703..02a16ac 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -28,9 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -184,7 +181,7 @@ extern int tqm834x_num_flash_banks;
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc */
 
 /*
  * Serial Port
@@ -256,6 +253,8 @@ extern int tqm834x_num_flash_banks;
 #define TSEC2_PHY_ADDR			1
 #define TSEC1_PHYIDX			0
 #define TSEC2_PHYIDX			0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
 
 /* Options are: TSEC[0-1] */
 #define CONFIG_ETHPRIME			"TSEC0"
@@ -281,7 +280,6 @@ extern int tqm834x_num_flash_banks;
 #define CFG_PCI1_IO_PHYS        CFG_PCI1_IO_BASE
 #define CFG_PCI1_IO_SIZE        0x1000000       /* 16M */
 
-
 #undef CONFIG_EEPRO100
 #define CONFIG_EEPRO100
 #undef CONFIG_TULIP
@@ -304,7 +302,7 @@ extern int tqm834x_num_flash_banks;
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
 	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x20000	/* 256K(one sector) for env */
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
@@ -316,6 +314,14 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE		1	/* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
 
 /*
  * Command line configuration.
@@ -329,6 +335,7 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -339,10 +346,6 @@ extern int tqm834x_num_flash_banks;
     #undef CONFIG_CMD_LOADS
 #endif
 
-
-
-
-
 /*
  * Miscellaneous configurable options
  */
@@ -376,15 +379,6 @@ extern int tqm834x_num_flash_banks;
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
@@ -498,23 +492,7 @@ extern int tqm834x_num_flash_banks;
  * Environment Configuration
  */
 
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR		D2:DA:5E:44:BC:29
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		1E:F3:40:21:92:53
-#endif
-
-#define CONFIG_IPADDR		192.168.205.1
-
-#define CONFIG_HOSTNAME		tqm8349
-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
-#define CONFIG_BOOTFILE		/tftpboot/tqm83xx/uImage
-
-#define CONFIG_SERVERIP		192.168.1.1
-#define CONFIG_GATEWAYIP	192.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-
-#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		400000	/* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
@@ -522,14 +500,14 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
-	"hostname=tqm83xx\0"						\
+	"hostname=tqm834x\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -541,16 +519,16 @@ extern int tqm834x_num_flash_banks;
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	"net_nfs=tftp 400000 ${bootfile};run nfsargs addip addtty;"     \
 		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/tqm83xx/uImage\0"				\
+	"bootfile=/tftpboot/tqm834x/uImage\0"				\
 	"kernel_addr=80060000\0"					\
 	"ramdisk_addr=80160000\0"					\
-	"load=tftp 100000 /tftpboot/tqm83xx/u-boot.bin\0"		\
+	"load=tftp 100000 /tftpboot/tqm834x/u-boot.bin\0"		\
 	"update=protect off 80000000 8003ffff; "			\
 		"era 80000000 8003ffff; cp.b 100000 80000000 40000\0"	\
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
 	""
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
@@ -563,7 +541,7 @@ extern int tqm834x_num_flash_banks;
 #define MTDIDS_DEFAULT		"nor0=TQM834x-0"
 
 /* default mtd partition table */
-#define MTDPARTS_DEFAULT	"mtdparts=TQM834x-0:256k(u-boot),128k(env),"\
+#define MTDPARTS_DEFAULT	"mtdparts=TQM834x-0:256k(u-boot),256k(env),"\
 						"1m(kernel),2m(initrd),"\
 						"-(user);"\