X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM8272.h;h=3f586fbbc13f522eaee524b8d52c8101328604e5;hb=c2120fbfbc4d1f6953228f86be8bdbf38bacfdab;hp=d1d9e8e68d3fe2700bc51c5406de6596be35e91f;hpb=17dd883c5b76bdade0f7a48f2eb02d918a5ebef9;p=kernel%2Fu-boot.git

diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index d1d9e8e..3f586fb 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -97,11 +81,10 @@
 
 #if CONFIG_I2C
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -135,8 +118,9 @@
 #define CONFIG_SYS_DTT_HYSTERESIS	3
 
 #else
+#undef CONFIG_SYS_I2C
 #undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
+#undef CONFIG_SYS_I2C_SOFT
 #endif
 
 /*
@@ -208,8 +192,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -311,9 +295,6 @@
 #if 0
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -332,8 +313,6 @@
 
 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #define	CONFIG_SYS_RESET_ADDRESS 0x40000104	/* "bad" address		*/
 
 /*
@@ -448,6 +427,7 @@
 
 #define	CONFIG_PCI
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100