X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM5200.h;h=8d165290ebfaf34f758707038a12f01d7e5c969d;hb=75eb9976b78ace0e667c1f5faf367acfaed141df;hp=495fdc83b916d58b14529ad2c5e1c671ceb47d02;hpb=1acc0087876229d7ade1b23aaecbccf63de8a615;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 495fdc8..8d16529 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -45,7 +45,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_BOOTCOUNT_LIMIT	1
 
@@ -125,8 +124,7 @@
 #ifndef CONFIG_CAM5200
 /* POST support */
 #define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_CPU	   | \
-				 CONFIG_SYS_POST_I2C)
+				 CONFIG_SYS_POST_CPU)
 #endif
 
 #ifdef CONFIG_POST
@@ -145,15 +143,8 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_BSP
-
-#ifdef CONFIG_VIDEO
-    #define CONFIG_CMD_BMP
-#endif
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -162,7 +153,6 @@
 
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
 	defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
-    #define CONFIG_CMD_IDE
 #endif
 
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
@@ -171,10 +161,6 @@
     #define CONFIG_CFG_FAT
 #endif
 
-#ifdef CONFIG_POST
-    #define CONFIG_CMD_DIAG
-#endif
-
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
@@ -290,54 +276,6 @@
 #endif
 
 /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#ifdef CONFIG_TQM5200_REV100
-#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
-#else
-#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
-#endif
-
-/*
- * I2C clock frequency
- *
- * Please notice, that the resulting clock frequency could differ from the
- * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-Boot
- * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
- * approximation allways lies below the configured value, never above.
- */
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
- * also). For other EEPROMs configuration should be verified. On Mini-FAP the
- * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
- * same configuration could be used.
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
-
-/*
- * HW-Monitor configuration on Mini-FAP
- */
-#if defined (CONFIG_MINIFAP)
-#define CONFIG_SYS_I2C_HWMON_ADDR		0x2C
-#endif
-
-/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_MINIFAP)
-#undef CONFIG_SYS_POST_I2C_ADDRS
-#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
-					 CONFIG_SYS_I2C_HWMON_ADDR,	\
-					 CONFIG_SYS_I2C_SLAVE}
-#endif
-
-/*
  * Flash configuration
  */
 #define CONFIG_SYS_FLASH_BASE		0xFC000000
@@ -556,18 +494,6 @@
 #endif
 
 /*
- * RTC configuration
- */
-#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
-# define CONFIG_RTC_M41T11 1
-# define CONFIG_SYS_I2C_RTC_ADDR 0x68
-# define CONFIG_SYS_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
-					   year */
-#else
-# define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
-#endif
-
-/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */