X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM5200.h;h=69c0336caee61093557d42b798b3186b823b234b;hb=c0cae2e24552d57f3e2f841ec235453413cd7389;hp=2154c7870eb6cef6af5ea0e84d43e5fa4e4ccabd;hpb=0bf7de838096e804f0cece8f2d94905477381b6e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..69c0336 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -5,23 +5,7 @@
  * (C) Copyright 2004-2006
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,21 +16,29 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
+#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU		*/
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
 
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000	boot low (standard configuration with room for
+ *		max 64 MByte Flash ROM)
+ * 0xFFF00000	boot high (for a backup copy of U-Boot)
+ * 0x00100000	boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFC000000
+#endif
+
 /* On a Cameron or on a FO300 board or ...				*/
-#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \
+	&& !defined(CONFIG_FO300)
 #define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
 #endif
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
 
 /*
@@ -71,7 +63,7 @@
 							/* switch is open */
 #endif	/* CONFIG_FO300 */
 
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	6	/* .. on PSC6			*/
@@ -84,7 +76,7 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1
 /* #define CONFIG_PCI_SCAN_SHOW	1 */
@@ -97,7 +89,6 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
@@ -132,7 +123,8 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+    defined(CONFIG_STK52XX)
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 #define CONFIG_USB_STORAGE
@@ -196,13 +188,15 @@
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 #endif
 
-#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+	defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
     #define CONFIG_CMD_FAT
     #define CONFIG_CMD_EXT2
 #endif
 
-#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
+#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
+	defined(CONFIG_STK52XX)
     #define CONFIG_CFG_USB
     #define CONFIG_CFG_FAT
 #endif
@@ -214,7 +208,7 @@
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
-#if (TEXT_BASE != 0xFFF00000)
+#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
 #   define CONFIG_SYS_LOWBOOT		1	/* Boot low */
 #endif
 
@@ -261,6 +255,11 @@
 	"fdt_addr=FC100000\0"						\
 	"kernel_addr=FC140000\0"					\
 	"ramdisk_addr=FC600000\0"
+#elif defined(CONFIG_CHARON)
+#define ENV_FLASH_LAYOUT						\
+	"fdt_addr=FDFC0000\0"						\
+	"kernel_addr=FC0A0000\0"					\
+	"ramdisk_addr=FC200000\0"
 #else	/* !CONFIG_TQM5200_B */
 #define ENV_FLASH_LAYOUT						\
 	"fdt_addr=FC0A0000\0"						\
@@ -283,7 +282,9 @@
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcons=setenv bootargs ${bootargs} "				\
 		"console=${console},${baudrate}\0"			\
-	"flash_self_old=sete console ttyS0; run ramargs addip addcons;"	\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"flash_self_old=sete console ttyS0; "				\
+		"run ramargs addip addcons addmtd; "			\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
@@ -295,7 +296,7 @@
 		"sete console ttyS0; run nfsargs addip addcons;bootm\0"	\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addcons; "				\
+		"run nfsargs addip addcons addmtd; "			\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
 	CUSTOM_ENV_SETTINGS						\
 	"load=tftp 200000 ${u-boot}\0"					\
@@ -362,10 +363,10 @@
 
 /* List of I2C addresses to be verified by POST */
 #if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
-				CONFIG_SYS_I2C_HWMON_ADDR,	\
-				CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_HWMON_ADDR,	\
+					 CONFIG_SYS_I2C_SLAVE}
 #endif
 
 /*
@@ -388,6 +389,7 @@
 /* use CFI flash driver */
 #define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CONFIG_FLASH_CFI_MTD		/* with MTD support */
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
@@ -409,13 +411,12 @@
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=TQM5200-0"
+#define MTDIDS_DEFAULT		"nor0=fc000000.flash"
 
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX)
 # if defined(CONFIG_TQM5200_B)
 #  if defined(CONFIG_SYS_LOWBOOT)
-#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:1m(firmware),"	\
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:1m(firmware),"	\
 						"256k(dtb),"		\
 						"2304k(kernel),"	\
 						"2560k(small-fs),"	\
@@ -423,7 +424,7 @@
 						"8m(misc),"		\
 						"16m(big-fs)"
 #  else	/* highboot */
-#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:2560k(kernel),"	\
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:2560k(kernel),"\
 						"3584k(small-fs),"	\
 						"2m(initrd),"		\
 						"8m(misc),"		\
@@ -431,7 +432,7 @@
 						"1m(firmware)"
 #  endif /* CONFIG_SYS_LOWBOOT */
 # else	/* !CONFIG_TQM5200_B */
-#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
 						"128k(dtb),"		\
 						"2304k(kernel),"	\
 						"2m(initrd),"		\
@@ -440,12 +441,19 @@
 						"15m(big-fs)"
 # endif /* CONFIG_TQM5200_B */
 #elif defined (CONFIG_CAM5200)
-#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:768k(firmware),"\
 						"1792k(kernel),"	\
 						"5632k(rootfs),"	\
 						"24m(home)"
+#elif defined (CONFIG_CHARON)
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"24320k(big-fs),"	\
+						"256k(dts)"
 #elif defined (CONFIG_FO300)
-#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+#   define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:640k(firmware),"\
 						"1408k(kernel),"	\
 						"2m(initrd),"		\
 						"4m(small-fs),"		\
@@ -479,17 +487,16 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -559,6 +566,7 @@
  * use PSC1: Bits 29-31 (mask: 0x00000007):
  *	 100 -> UART (on all boards).
  */
+#if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
 #if defined (CONFIG_MINIFAP)
 # define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
@@ -578,6 +586,7 @@
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
 #endif
+#endif
 
 /*
  * RTC configuration
@@ -595,11 +604,9 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
@@ -623,8 +630,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
@@ -633,13 +638,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE