X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM5200.h;h=495fdc83b916d58b14529ad2c5e1c671ceb47d02;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=e646c0035da8ddc678d89547032748cc84856e0b;hpb=4d339a9e8a758889de5da16b562aff5601bb3d8d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index e646c00..495fdc8 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -19,7 +19,6 @@
 #define CONFIG_MPC5200		1	/* This is an MPC5200 CPU		*/
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
-#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
@@ -52,8 +51,6 @@
 
 #ifdef CONFIG_FO300
 #define CONFIG_SYS_DEVICE_NULLDEV		1	/* enable null device */
-#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
 #define CONFIG_USB_BIN_FIXUP		1	/* for a buggy USB device */
 #if 0
 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED	1	/* silent console on PSC1 when S1 */
@@ -78,8 +75,6 @@
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
 #if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1
 /* #define CONFIG_PCI_SCAN_SHOW	1 */
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
@@ -99,38 +94,25 @@
  * Video console
  */
 #ifndef CONFIG_TQM5200S		/* No graphics controller on TQM5200S */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_SM501
 #define CONFIG_VIDEO_SM501_32BPP
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
 
 #ifndef CONFIG_FO300
-#define CONFIG_CONSOLE_EXTRA_INFO
 #else
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
 
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif /* #ifndef CONFIG_TQM5200S */
 
-
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /* USB */
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
     defined(CONFIG_STK52XX)
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -152,7 +134,6 @@
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
 #endif
 
-
 /*
  * BOOTP options
  */
@@ -161,20 +142,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
 
 #ifdef CONFIG_VIDEO
@@ -189,8 +163,6 @@
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
 	defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
-    #define CONFIG_CMD_FAT
-    #define CONFIG_CMD_EXT2
 #endif
 
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
@@ -203,7 +175,6 @@
     #define CONFIG_CMD_DIAG
 #endif
 
-
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
@@ -213,7 +184,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;" \
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -490,7 +460,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
 #endif
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -604,7 +573,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
@@ -629,11 +597,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
 /*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
  * Various low-level settings
  */
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI