X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTOP5200.h;h=2267d59d750000596defa8695b0fce49ae25df35;hb=f9c1456cf632175afb7d6b27f42f1aab8432be0f;hp=21daa2d971bc7f5346cf3e9969e5cfceef3dfe47;hpb=c18960049f8ea9b0a8ad0a05c93e23fbab025da0;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 21daa2d..2267d59 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -1,16 +1,17 @@ /* * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * modified for TOP5200 by Reinhard Meyer, www.emk-elektronik.de - * TOP5200 differences from IceCube: - * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks - * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins - * 1 SDRAM/DDRAM Bank up to 256 MB - * local VPD I2C Bus is software driven and uses - * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL - * FLASH is located at 0x80000000 - * Internal regs are at 0xfff00000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * modified for TOP5200-series by Reinhard Meyer, www.emk-elektronik.de + * + * TOP5200 differences from IceCube: + * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks + * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins + * 1 SDRAM/DDRAM Bank up to 256 MB + * local VPD I2C Bus is software driven and uses + * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL + * FLASH is re-located at 0xff000000 + * Internal regs are at 0xf0000000 * Reset jumps to 0x00000100 * * See file CREDITS for list of people who contributed to this @@ -40,29 +41,31 @@ * (easy to change) */ -#define CONFIG_MPC5XXX 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ -#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */ +/* + * allowed and functional CONFIG_SYS_TEXT_BASE values: + * 0xff000000 low boot at 0x00000100 (default board setting) + * 0xfff00000 high boot at 0xfff00100 (board needs modification) + * 0x00100000 RAM load and test + */ +#define CONFIG_SYS_TEXT_BASE 0xff000000 -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Serial console configuration */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_EVAL5200 /* PCI is supported with Evaluation board only */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -71,6 +74,7 @@ # define CONFIG_PCI 1 # define CONFIG_PCI_PNP 1 # define CONFIG_PCI_SCAN_SHOW 1 +# define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 # define CONFIG_PCI_MEM_BUS 0x40000000 # define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS @@ -80,61 +84,133 @@ # define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS # define CONFIG_PCI_IO_SIZE 0x01000000 -# define ADD_PCI_CMD CFG_CMD_PCI +#endif + +/* USB */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) -#else /* no Evaluation board */ +# define CONFIG_USB_OHCI +# define CONFIG_USB_CLOCK 0x0001bbbb +# if defined (CONFIG_EVAL5200) +# define CONFIG_USB_CONFIG 0x00005100 +# else +# define CONFIG_USB_CONFIG 0x00001000 +# endif +# define CONFIG_DOS_PARTITION +# define CONFIG_USB_STORAGE -# define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ +#endif +/* IDE */ +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) +# define CONFIG_DOS_PARTITION #endif + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ - CFG_CMD_I2C | CFG_CMD_EEPROM) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_REGINFO + +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB +#define CONFIG_CMD_PCI +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include + +/* + * MUST be low boot - HIGHBOOT is not supported anymore + */ +#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ +# define CONFIG_SYS_LOWBOOT 1 +# define CONFIG_SYS_LOWBOOT16 1 +#else +# error "CONFIG_SYS_TEXT_BASE must be 0xff000000" +#endif /* * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "bootfile=/tftpboot/MPC5200/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ - +#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + /* * I2C configuration */ /* * EEPROM configuration */ -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 + +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_SIZE 0x2000 -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_EEPROM_SIZE 0x2000 - #define CONFIG_ENV_OVERWRITE #define CONFIG_MISC_INIT_R - + #undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 - +#define CONFIG_SOFT_I2C 1 /* I2C with softwate support */ + #if defined (CONFIG_SOFT_I2C) # define SDA0 0x40 # define SCL0 0x80 -# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00)) -# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08)) -# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c)) -# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20)) -# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04)) +# define GPIOE0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c00)) +# define DDR0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c08)) +# define DVO0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c0c)) +# define DVI0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c20)) +# define ODE0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c04)) # define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);} # define I2C_READ ((DVI0&SDA0)?1:0) # define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;} @@ -142,150 +218,203 @@ # define I2C_DELAY {udelay(5);} # define I2C_ACTIVE {DDR0|=SDA0;} # define I2C_TRISTATE {DDR0&=~SDA0;} -# define CFG_I2C_SPEED 100000 -# define CFG_I2C_SLAVE 0x7F +# define CONFIG_SYS_I2C_SPEED 100000 +# define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_FACT_ADDR 0x57 +#endif + +#if defined (CONFIG_HARD_I2C) +# define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +# define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +# define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_FACT_ADDR 0x54 #endif - -#if defined (CONFIG_HARD_I2C) -# define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ -# define CFG_I2C_SPEED 100000 /* 100 kHz */ -# define CFG_I2C_SLAVE 0x7F -#endif /* * Flash configuration, expect one 16 Megabyte Bank at most */ -#define CFG_FLASH_BASE 0xff000000 -#define CFG_FLASH_SIZE 0x01000000 -#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0) +#define CONFIG_SYS_FLASH_BASE 0xff000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0) -#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ #undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ -/* - * DRAM configuration - will be read from VPD later... TODO! - */ -#if 0 -/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ -#define CFG_DRAM_DDR 0 -#define CFG_DRAM_EMODE 0 -#define CFG_DRAM_MODE 0x008D -#define CFG_DRAM_CONTROL 0x514F0000 -#define CFG_DRAM_CONFIG1 0xC2233A00 -#define CFG_DRAM_CONFIG2 0x88B70004 -#define CFG_DRAM_TAP_DEL 0x08 -#define CFG_DRAM_RAM_SIZE 0x19 -#endif -#if 1 -/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ -#define CFG_DRAM_DDR 0 -#define CFG_DRAM_EMODE 0 -#define CFG_DRAM_MODE 0x00CD -#define CFG_DRAM_CONTROL 0x514F0000 -#define CFG_DRAM_CONFIG1 0xD2333A00 -#define CFG_DRAM_CONFIG2 0x8AD70004 -#define CFG_DRAM_TAP_DEL 0x08 -#define CFG_DRAM_RAM_SIZE 0x19 -#endif - +/* + * DRAM configuration - will be read from VPD later... TODO! + */ +#if 0 +/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ +#define CONFIG_SYS_DRAM_DDR 0 +#define CONFIG_SYS_DRAM_EMODE 0 +#define CONFIG_SYS_DRAM_MODE 0x008D +#define CONFIG_SYS_DRAM_CONTROL 0x514F0000 +#define CONFIG_SYS_DRAM_CONFIG1 0xC2233A00 +#define CONFIG_SYS_DRAM_CONFIG2 0x88B70004 +#define CONFIG_SYS_DRAM_TAP_DEL 0x08 +#define CONFIG_SYS_DRAM_RAM_SIZE 0x19 +#endif +#if 1 +/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ +#define CONFIG_SYS_DRAM_DDR 0 +#define CONFIG_SYS_DRAM_EMODE 0 +#define CONFIG_SYS_DRAM_MODE 0x00CD +#define CONFIG_SYS_DRAM_CONTROL 0x514F0000 +#define CONFIG_SYS_DRAM_CONFIG1 0xD2333A00 +#define CONFIG_SYS_DRAM_CONFIG2 0x8AD70004 +#define CONFIG_SYS_DRAM_TAP_DEL 0x08 +#define CONFIG_SYS_DRAM_RAM_SIZE 0x19 +#endif + /* * Environment settings */ -#define CFG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ -#define CFG_ENV_OFFSET 0x1000 -#define CFG_ENV_SIZE 0x0700 -#define CFG_I2C_EEPROM_ADDR 0x57 - -/* - * VPD settings - */ -#define CFG_FACT_OFFSET 0x1800 -#define CFG_FACT_SIZE 0x0800 -#define CFG_I2C_FACT_ADDR 0x57 - +#define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ +#define CONFIG_ENV_OFFSET 0x1000 +#define CONFIG_ENV_SIZE 0x0700 + +/* + * VPD settings + */ +#define CONFIG_SYS_FACT_OFFSET 0x1800 +#define CONFIG_SYS_FACT_SIZE 0x0800 + /* - * Memory map - * - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 + * Memory map + * + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 */ -#define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_MBAR 0xf0000000 /* DO NOT CHANGE this */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 /* Use SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM -#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Ethernet configuration */ -#define CONFIG_MPC5XXX_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1f +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII10 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x1f #define CONFIG_PHY_TYPE 0x79c874 /* - * GPIO configuration: - * PSC1,2,3 predefined as UART - * PCI disabled + * GPIO configuration: + * PSC1,2,3 predefined as UART + * PCI disabled * Ethernet 100 with MD */ -#define CFG_GPS_PORT_CONFIG 0x00058444 +#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058044 /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + +#ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */ + #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */ + #define RTC(reg) (0xf0010000+reg) + /* setup CS2 for M48T08. Must MAP 64kB */ + #define CONFIG_SYS_CS2_START RTC(0) + #define CONFIG_SYS_CS2_SIZE 0x10000 + /* setup CS2 configuration register: */ + /* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */ + /* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */ + #define CONFIG_SYS_CS2_CFG 0x00047800 +#else + #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ +#endif /* * Various low-level settings */ -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_BOOTCS_CFG 0x00047801 +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 + +#define CONFIG_SYS_RESET_ADDRESS 0x7f000000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) -#define CFG_BOOTCS_START CFG_FLASH_BASE -#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x00047801 -#define CFG_CS0_START CFG_FLASH_BASE -#define CFG_CS0_SIZE CFG_FLASH_SIZE +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) -#define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x33333333 +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005c) -#define CFG_RESET_ADDRESS 0x7f000000 +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 #endif /* __CONFIG_H */