X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTK885D.h;h=4176c7fe5678d8a91f154e8802d519ed5377d0b5;hb=219f4788d33b04e394d4ade1feaedc0292acc790;hp=14ff62c52f4228e6378b16d5b5fe7fcc387758b7;hpb=f82642e33899766892499b163e60560fbbf87773;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 14ff62c..4176c7f 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -40,6 +40,8 @@
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
 #define CONFIG_TK885D		1	/* ...in a TK885D base board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
@@ -48,7 +50,8 @@
 						/* 'cpuclk' variable with valid value)	*/
 
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-
+#define CONFIG_SYS_SMC_RXBUFLEN	128
+#define CONFIG_SYS_MAXIDLE	10
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -64,8 +67,8 @@
 #undef	CONFIG_BOOTARGS
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	"ethprime=FEC ETHERNET\0"					\
-	"ethact=FEC ETHERNET\0"						\
+	"ethprime=FEC\0"						\
+	"ethact=FEC\0"							\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
@@ -175,9 +178,6 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
@@ -197,8 +197,6 @@
 
 #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Enable loopw command.
  */
@@ -218,9 +216,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -483,14 +480,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Network configuration
  */
 #define CONFIG_FEC_ENET			/* enable ethernet on FEC */
@@ -513,6 +502,11 @@
 #define CONFIG_MII_INIT	1
 
 #define CONFIG_NET_RETRY_COUNT	3
-#define CONFIG_ETHPRIME		"FEC ETHERNET"
+#define CONFIG_ETHPRIME		"FEC"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
 
 #endif	/* __CONFIG_H */