X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FTASREG.h;h=18ffbfd72f09477c22a1a3d290bb712afd375ca2;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=d27a54ed29c924a9ae4931a9fdc227dfcb25b13e;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index d27a54e..18ffbfd 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -46,9 +46,9 @@ #define CONFIG_MCFTMR #define CONFIG_MCFUART -#define CFG_UART_PORT (0) +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG @@ -78,51 +78,51 @@ #define CONFIG_BOOTDELAY 3 -#define CFG_PROMPT "=> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ -#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CFG_LOAD_ADDR 0x200000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CFG_MEMTEST_START 0x400 -#define CFG_MEMTEST_END 0x380000 +#define CONFIG_SYS_MEMTEST_START 0x400 +#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* * Clock configuration: enable only one of the following options */ #if 0 /* this setting will run the cpu at 11MHz */ -#define CFG_PLL_BYPASS 1 /* bypass PLL for test purpose */ -#undef CFG_FAST_CLK /* MCF5249 can run at 140MHz */ -#define CFG_CLK 11289600 /* PLL bypass */ +#define CONFIG_SYS_PLL_BYPASS 1 /* bypass PLL for test purpose */ +#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */ +#define CONFIG_SYS_CLK 11289600 /* PLL bypass */ #endif #if 0 /* this setting will run the cpu at 70MHz */ -#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ -#undef CFG_FAST_CLK /* MCF5249 can run at 140MHz */ -#define CFG_CLK 72185018 /* The next lower speed */ +#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */ +#define CONFIG_SYS_CLK 72185018 /* The next lower speed */ #endif #if 1 /* this setting will run the cpu at 140MHz */ -#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ -#define CFG_FAST_CLK 1 /* MCF5249 can run at 140MHz */ -#define CFG_CLK 132025600 /* MCF5249 can run at 140MHz */ +#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ #endif /* @@ -131,34 +131,34 @@ * You should know what you are doing if you make changes here. */ -#define CFG_MBAR 0x10000000 /* Register Base Addrs */ -#define CFG_MBAR2 0x80000000 +#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CONFIG_SYS_MBAR2 0x80000000 /*----------------------------------------------------------------------- * I2C */ #define CONFIG_SOFT_I2C -#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ /* 32 byte page write mode using*/ /* last 5 bits of the address */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #if defined (CONFIG_SOFT_I2C) #if 0 /* push-pull */ #define SDA 0x00800000 #define SCL 0x00000008 -#define DIR0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN)) -#define DIR1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN)) -#define OUT0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT)) -#define OUT1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT)) -#define IN0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ)) -#define IN1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ)) +#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN)) +#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN)) +#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT)) +#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT)) +#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ)) +#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ)) #define I2C_INIT {OUT1|=SDA;OUT0|=SCL;} #define I2C_READ ((IN1&SDA)?1:0) #define I2C_SDA(x) {if(x)OUT1|=SDA;else OUT1&=~SDA;} @@ -169,12 +169,12 @@ #else /* open-collector */ #define SDA 0x00800000 #define SCL 0x00000008 -#define DIR0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN)) -#define DIR1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN)) -#define OUT0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT)) -#define OUT1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT)) -#define IN0 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ)) -#define IN1 *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ)) +#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN)) +#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN)) +#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT)) +#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT)) +#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ)) +#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ)) #define I2C_INIT {DIR1&=~SDA;DIR0&=~SCL;OUT1&=~SDA;OUT0&=~SCL;} #define I2C_READ ((IN1&SDA)?1:0) #define I2C_SDA(x) {if(x)DIR1&=~SDA;else DIR1|=SDA;} @@ -188,11 +188,11 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR 0xFFC40000 /* Address of Environment Sector*/ @@ -202,94 +202,94 @@ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CFG_FLASH_BASE 0xffc00000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CONFIG_SYS_FLASH_BASE 0xffc00000 #if 0 /* test-only */ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ #endif -#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#define CFG_MONITOR_LEN 0x20000 -#define CFG_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ -#define CFG_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MONITOR_LEN 0x20000 +#define CONFIG_SYS_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ +#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ /* * The following defines are added for buggy IOP480 byte interface. * All other boards should use the standard values (CPCI405 etc.) */ -#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ -#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ -#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ +#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ +#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ +#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions */ /* CS0 - AMD Flash, address 0xffc00000 */ -#define CFG_CSAR0 0xffc0 -#define CFG_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +#define CONFIG_SYS_CSAR0 0xffc0 +#define CONFIG_SYS_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ -#define CFG_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ +#define CONFIG_SYS_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ /* CS1 - FPGA, address 0xe0000000 */ -#define CFG_CSAR1 0xe000 -#define CFG_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ -#define CFG_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ +#define CONFIG_SYS_CSAR1 0xe000 +#define CONFIG_SYS_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ +#define CONFIG_SYS_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ /*----------------------------------------------------------------------- * Port configuration */ -#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ -#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CFG_GPIO1_LED 0x00400000 /* user led */ +#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ /*----------------------------------------------------------------------- * FPGA stuff */ -#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */ -#define CFG_FPGA_MAX_SIZE 512*1024 /* 512kByte is enough for XC2S200*/ +#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */ +#define CONFIG_SYS_FPGA_MAX_SIZE 512*1024 /* 512kByte is enough for XC2S200*/ /* FPGA program pin configuration */ -#define CFG_FPGA_PRG 0x00010000 /* FPGA program pin (ppc output) */ -#define CFG_FPGA_CLK 0x00040000 /* FPGA clk pin (ppc output) */ -#define CFG_FPGA_DATA 0x00020000 /* FPGA data pin (ppc output) */ -#define CFG_FPGA_INIT 0x00080000 /* FPGA init pin (ppc input) */ -#define CFG_FPGA_DONE 0x00100000 /* FPGA done pin (ppc input) */ +#define CONFIG_SYS_FPGA_PRG 0x00010000 /* FPGA program pin (ppc output) */ +#define CONFIG_SYS_FPGA_CLK 0x00040000 /* FPGA clk pin (ppc output) */ +#define CONFIG_SYS_FPGA_DATA 0x00020000 /* FPGA data pin (ppc output) */ +#define CONFIG_SYS_FPGA_INIT 0x00080000 /* FPGA init pin (ppc input) */ +#define CONFIG_SYS_FPGA_DONE 0x00100000 /* FPGA done pin (ppc input) */ #endif /* _TASREG_H */