X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT4240RDB.h;h=ed3b0f7202f8f5a6a5088b00e33c9ecc8e684aa5;hb=3bf926c0dd01e7beb3a6815b2e0f28e989fe4120;hp=77323a7bb2306c6f505fee4c35642baadd3b4d00;hpb=ec90ac7359a10513f1458ad5840858e6d8be0624;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 77323a7..ed3b0f7 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_T4240RDB
-
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
 
@@ -25,7 +23,6 @@
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
@@ -52,7 +49,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #endif
@@ -63,9 +59,6 @@
 #define CONFIG_CMD_REGINFO
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_MP			/* support multiple processors */
 
@@ -78,18 +71,13 @@
 #endif
 
 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_IFC			/* Enable IFC Support */
-#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
-#define CONFIG_PCI			/* Enable PCI/PCIE */
+#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_PCIE1			/* PCIE controller 1 */
 #define CONFIG_PCIE2			/* PCIE controller 2 */
 #define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 /*
@@ -136,13 +124,11 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 
 /*
  * IFC Definitions
@@ -250,10 +236,8 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -270,8 +254,6 @@
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -289,8 +271,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -334,13 +314,11 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BAUDRATE	115200
-
 #define CONFIG_HVBOOT					\
 	"setenv bootargs config-addr=0x60000000; "	\
 	"bootm 0x01000000 - 0x00f00000"
 
-#ifdef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_MTD_NOR_FLASH
 #ifndef CONFIG_RAMBOOT_PBL
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -692,8 +670,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -705,28 +681,17 @@ unsigned long get_board_ddr_clk(void);
 /*
 * USB
 */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
 
-#define CONFIG_MMC
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 
 #define __USB_PHY_TYPE	utmi
 
@@ -736,7 +701,7 @@ unsigned long get_board_ddr_clk(void);
  * interleaving. It can be cacheline, page, bank, superbank.
  * See doc/README.fsl-ddr for details.
  */
-#ifdef CONFIG_PPC_T4240
+#ifdef CONFIG_ARCH_T4240
 #define CTRL_INTLV_PREFERED 3way_4KB
 #else
 #define CTRL_INTLV_PREFERED cacheline