X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT208xRDB.h;h=886e0b745f3abbc5869f29f0934740821145ed33;hb=c0ad62c5f7535bf13b24aab103356f827f40d0cd;hp=1901211e4fc0fd1f1b6bd3604e4d4c7db1429150;hpb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 1901211..886e0b7 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -24,8 +24,6 @@
 #define CONFIG_SYS_NUM_CPC	CONFIG_SYS_NUM_DDR_CTLRS
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
-
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_PAD_TO		0x40000
 #define CONFIG_SPL_MAX_SIZE		0x28000
@@ -42,7 +40,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -55,7 +52,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -67,7 +63,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg
 #endif
 
 #endif /* CONFIG_RAMBOOT_PBL */
@@ -212,8 +207,6 @@ unsigned long get_board_sys_clk(void);
 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */\
 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
 					FTIM0_NAND_TWP(0x18)    | \
@@ -231,7 +224,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
@@ -296,7 +288,6 @@ unsigned long get_board_sys_clk(void);
 						GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /*
  * Serial Port
@@ -460,8 +451,6 @@ unsigned long get_board_sys_clk(void);
  */
 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
 
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR		(3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -546,11 +535,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */