X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT208xRDB.h;h=803d8fbe5fc1e4d8d750c7c669afac227e43ab18;hb=fa379223cd61052331342e525778d96270ee6ed9;hp=f8337320387b65fc4add3986d4a631d539a538d2;hpb=c83a824e62277162ad35f52879b2316902c0eff5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index f833732..803d8fb 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -12,7 +12,6 @@
 #define __T2080RDB_H
 
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
-#define CONFIG_USB_EHCI
 #define CONFIG_FSL_SATA_V2
 
 /* High Level Configuration Options */
@@ -27,7 +26,6 @@
 
 #define CONFIG_SYS_FSL_CPC	/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC	CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_CAAM		/* Enable SEC/CAAM */
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
@@ -45,7 +43,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #ifdef CONFIG_NAND
@@ -97,7 +94,6 @@
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -123,7 +119,7 @@
 #define CONFIG_SYS_MEMTEST_END		0x00400000
 #define CONFIG_SYS_ALT_MEMTEST
 
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -131,7 +127,6 @@
 
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
 #define CONFIG_ENV_SPI_MAX_HZ	10000000
@@ -141,23 +136,19 @@
 #define CONFIG_ENV_SECT_SIZE	0x10000
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV	0
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_OFFSET	(512 * 0x800)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_OFFSET	(2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_IS_IN_REMOTE
 #define CONFIG_ENV_ADDR		0xffe20000
 #define CONFIG_ENV_SIZE		0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
 #define CONFIG_ENV_SIZE		0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
@@ -310,7 +301,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
 
 #if defined(CONFIG_NAND)
@@ -632,7 +622,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_ETHPRIME		"FM1@DTSEC3"
-#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -649,13 +638,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
 #endif
 
 /*
  * USB
  */
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
@@ -674,10 +662,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 			"spi0=spife110000.1"
@@ -692,22 +679,6 @@ unsigned long get_board_ddr_clk(void);
  */
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_REGINFO
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
-
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
-/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
@@ -745,7 +716,6 @@ unsigned long get_board_ddr_clk(void);
 
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
-#define CONFIG_BAUDRATE		115200
 #define __USB_PHY_TYPE		utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\