X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT208xQDS.h;h=c54f7f53e575eaae6c5c674247128494c7cece3d;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=54ec1abd66a2fb2ee6df32ba3d01981a7731fe3a;hpb=f643fb9f4c8fc5c5dceb8c2c2893447d18413d77;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 54ec1ab..c54f7f5 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -10,6 +11,8 @@
 #ifndef __T208xQDS_H
 #define __T208xQDS_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_FSL_SATA_V2
@@ -46,7 +49,7 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
@@ -118,25 +121,8 @@
 #endif
 
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_ENV_SIZE		0x2000	   /* 8KB */
-#define CONFIG_ENV_OFFSET	0x100000   /* 1MB */
-#define CONFIG_ENV_SECT_SIZE	0x10000
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_MMC_ENV_DEV	0
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_OFFSET	(512 * 0x800)
-#elif defined(CONFIG_NAND)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_OFFSET	(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_ADDR		0xffe20000
-#define CONFIG_ENV_SIZE		0x2000
-#elif defined(CONFIG_ENV_IS_NOWHERE)
-#define CONFIG_ENV_SIZE		0x2000
-#else
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
 #endif
 
 #ifndef __ASSEMBLY__
@@ -153,9 +139,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_INIT_L3_ADDR		0xFFFC0000
 #define CONFIG_SYS_L3_SIZE		(512 << 10)
 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)
-#endif
+#define SPL_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SPL_GD_ADDR + 12 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(50 << 10)
 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SPL_GD_ADDR + 64 * 1024)
@@ -307,7 +291,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
@@ -404,8 +388,8 @@ unsigned long get_board_ddr_clk(void);
 /*
  * I2C
  */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
@@ -418,6 +402,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
+#endif
+
+#define CONFIG_SYS_I2C_FSL
+
 #define I2C_MUX_PCA_ADDR_PRI	0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC1	0x75 /* I2C bus multiplexer,secondary 1 */
 #define I2C_MUX_PCA_ADDR_SEC2	0x76 /* I2C bus multiplexer,secondary 2 */
@@ -587,7 +575,7 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR	(11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
@@ -606,9 +594,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_TERANETICS
 #define RGMII_PHY1_ADDR	0x1
 #define RGMII_PHY2_ADDR	0x2
 #define FM1_10GEC1_PHY_ADDR	  0x3
@@ -649,7 +634,6 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33