X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT208xQDS.h;h=57640acfc90be4775eca1d2f931ab7a9e04f89f9;hb=cc1386b0d3ded14249a42ea226ccc5c15c4b3ff3;hp=aed2e87a1a1186d9279320e917cea3baa88be8e5;hpb=191ee8aac60d6b828ee5f933ab2c6aceda167082;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index aed2e87..57640ac 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -11,31 +11,24 @@
 #ifndef __T208xQDS_H
 #define __T208xQDS_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_SRIO		/* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1		/* SRIO port 1 */
 #define CONFIG_SRIO2		/* SRIO port 2 */
-#elif defined(CONFIG_ARCH_T2081)
 #endif
 
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV	/* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP 1
-#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
-#endif
-
 #define CONFIG_SYS_FSL_CPC	/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC	CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
-
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_PAD_TO		0x40000
 #define CONFIG_SPL_MAX_SIZE		0x28000
@@ -52,11 +45,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -69,11 +57,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -85,11 +68,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
-#endif
 #endif
 
 #endif /* CONFIG_RAMBOOT_PBL */
@@ -112,24 +90,15 @@
  */
 #define CONFIG_SYS_CACHE_STASHING
 #define CONFIG_BTB		/* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
 #endif
 
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_MMC_ENV_DEV	0
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
-unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk()
-#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
 
 /*
  * Config the L3 Cache as L3 SRAM
@@ -146,11 +115,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DCSRBAR_PHYS	0xf00000000ull
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM	0
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 
 /*
  * DDR Setup
@@ -160,7 +126,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_DIMM_SLOTS_PER_CTLR	2
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM	0
 #define CONFIG_SYS_SDRAM_SIZE	2048	/* for fixed parameter use */
 #define SPD_EEPROM_ADDRESS1	0x51
@@ -368,7 +333,6 @@ unsigned long get_board_ddr_clk(void);
 						GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /*
  * Serial Port
@@ -386,23 +350,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * I2C
  */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
-#define CONFIG_SYS_FSL_I2C_SPEED   100000
-#define CONFIG_SYS_FSL_I2C2_SPEED  100000
-#define CONFIG_SYS_FSL_I2C3_SPEED  100000
-#define CONFIG_SYS_FSL_I2C4_SPEED  100000
-#endif
-
-#define CONFIG_SYS_I2C_FSL
 
 #define I2C_MUX_PCA_ADDR_PRI	0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC1	0x75 /* I2C bus multiplexer,secondary 1 */
@@ -502,26 +449,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 
 #ifdef CONFIG_PCI
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif
 
@@ -634,8 +561,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
 
 /*
@@ -651,7 +576,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000 /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -661,11 +585,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -673,8 +592,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BOOTFILE	 "uImage"
 #define CONFIG_UBOOTPATH "u-boot.bin"	/* U-Boot image on TFTP server */
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
 #define __USB_PHY_TYPE		utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
@@ -702,7 +619,7 @@ unsigned long get_board_ddr_clk(void);
  * For emulation this causes u-boot to jump to the start of the
  * proof point app code automatically
  */
-#define CONFIG_PROOF_POINTS				\
+#define PROOF_POINTS				\
 	"setenv bootargs root=/dev/$bdev rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"cpu 1 release 0x29000000 - - -;"		\
@@ -714,11 +631,11 @@ unsigned long get_board_ddr_clk(void);
 	"cpu 7 release 0x29000000 - - -;"		\
 	"go 0x29000000"
 
-#define CONFIG_HVBOOT				\
+#define HVBOOT				\
 	"setenv bootargs config-addr=0x60000000; "	\
 	"bootm 0x01000000 - 0x00f00000"
 
-#define CONFIG_ALU				\
+#define ALU				\
 	"setenv bootargs root=/dev/$bdev rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"cpu 1 release 0x01000000 - - -;"		\
@@ -730,7 +647,7 @@ unsigned long get_board_ddr_clk(void);
 	"cpu 7 release 0x01000000 - - -;"		\
 	"go 0x01000000"
 
-#define CONFIG_LINUX				\
+#define LINUXBOOTCOMMAND				\
 	"setenv bootargs root=/dev/ram rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"setenv ramdiskaddr 0x02000000;"		\
@@ -738,14 +655,14 @@ unsigned long get_board_ddr_clk(void);
 	"setenv loadaddr 0x1000000;"			\
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_HDBOOT					\
+#define HDBOOT					\
 	"setenv bootargs root=/dev/$bdev rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"tftp $loadaddr $bootfile;"			\
 	"tftp $fdtaddr $fdtfile;"			\
 	"bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_NFSBOOTCOMMAND			\
+#define NFSBOOTCOMMAND			\
 	"setenv bootargs root=/dev/nfs rw "	\
 	"nfsroot=$serverip:$rootpath "		\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
@@ -754,7 +671,7 @@ unsigned long get_board_ddr_clk(void);
 	"tftp $fdtaddr $fdtfile;"		\
 	"bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND				\
+#define RAMBOOTCOMMAND				\
 	"setenv bootargs root=/dev/ram rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"tftp $ramdiskaddr $ramdiskfile;"		\
@@ -762,7 +679,7 @@ unsigned long get_board_ddr_clk(void);
 	"tftp $fdtaddr $fdtfile;"			\
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
+#define CONFIG_BOOTCOMMAND		LINUXBOOTCOMMAND
 
 #include <asm/fsl_secure_boot.h>