X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT104xRDB.h;h=a1650f543069486d1370b855115372231d80143f;hb=6cc04547cb3bbd3a3d78947f200acbae19e3c67f;hp=ea239f74c147861c64b262b5e6c4420b31317e26;hpb=8f7a16aac36c2a38956bd04b53cb7b94b7a70180;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index ea239f7..ad8037e 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __CONFIG_H
@@ -15,22 +15,6 @@
 #include <asm/config_mpc85xx.h>
 
 #ifdef CONFIG_RAMBOOT_PBL
-
-#ifndef CONFIG_NXP_ESBC
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_PBI \
-		$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
-#endif
-
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_PAD_TO		0x40000
-#define CONFIG_SPL_MAX_SIZE		0x28000
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_SKIP_RELOCATE
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
 #define RESET_VECTOR_OFFSET		0x27FFC
 #define BOOT_PAGE_OFFSET		0x27000
 
@@ -48,59 +32,14 @@
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
-#define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(256 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define	CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -109,78 +48,26 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 #define CONFIG_SYS_MMC_U_BOOT_DST	(0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(260 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define	CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
-#endif
 #endif
 
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-
-/* support deep sleep */
-#define CONFIG_DEEP_SLEEP
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
-#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1			/* PCIE controller 1 */
-#define CONFIG_PCIE2			/* PCIE controller 2 */
-#define CONFIG_PCIE3			/* PCIE controller 3 */
-#define CONFIG_PCIE4			/* PCIE controller 4 */
-
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_BOOTSCRIPT_COPY_RAM
-#endif
-#endif
-
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	66666666
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
-#define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
 #endif
 
-#define CONFIG_ENABLE_36BIT_PHYS
-
 /*
  *  Config the L3 Cache as L3 SRAM
  */
@@ -191,12 +78,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
  */
 #define CONFIG_SYS_INIT_L3_VADDR	0xFFFC0000
-#define CONFIG_SYS_L3_SIZE		256 << 10
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 #define SPL_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(30 << 10)
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SPL_GD_ADDR + 64 * 1024)
 
 #define CONFIG_SYS_DCSRBAR		0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
@@ -208,12 +90,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#define CONFIG_DDR_SPD
-
-#define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x51
 
 #define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
@@ -250,15 +126,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 				FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3	0x0
 
-#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
 
 /* CPLD on IFC */
@@ -309,7 +178,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_CS2_FTIM3		0x0
 
 /* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_BASE		0xff800000
 #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
 
@@ -328,8 +196,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 				| CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
 					FTIM0_NAND_TWP(0x18)   | \
@@ -346,9 +212,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
@@ -386,27 +249,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008044
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_A008044_WORKAROUND
-#endif
-#endif
-
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe03c000
@@ -416,12 +262,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 #define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -439,39 +280,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 
-#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
-/* Video */
-#define CONFIG_FSL_DIU_FB
-
-#ifdef CONFIG_FSL_DIU_FB
-#define CONFIG_FSL_DIU_CH7301
-#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-#endif
-
-/* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED	400000	/* I2C speed in Hz */
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C3_SPEED	400000
-#define CONFIG_SYS_FSL_I2C4_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET	0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET	0x119100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
-#endif
-
-#define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
 #define I2C_MUX_CH_DEFAULT      0x8
@@ -479,11 +287,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #if defined(CONFIG_TARGET_T1042RDB_PI)	|| \
 	defined(CONFIG_TARGET_T1040D4RDB)	|| \
 	defined(CONFIG_TARGET_T1042D4RDB)
-/* LDI/DVI Encoder for display */
-#define CONFIG_SYS_I2C_LDI_ADDR		0x38
-#define CONFIG_SYS_I2C_DVI_ADDR		0x75
-#define CONFIG_SYS_I2C_DVI_BUS_NUM	0
-
 /*
  * RTC configuration
  */
@@ -536,55 +339,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_PCIE4_IO_VIRT	0xf8030000
 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
 #endif
-
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
 /*
 * USB
 */
-#define CONFIG_HAS_FSL_DR_USB
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 /* Qman/Bman */
@@ -616,41 +378,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
-
-#define CONFIG_U_QE
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR		0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x920)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_QE_FW_ADDR		(7 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
-#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_FMAN_ENET
@@ -683,20 +410,11 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x0c
 #endif
 #endif
-
-#define CONFIG_ETHPRIME		"FM1@DTSEC4"
 #endif
 
 /*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -704,11 +422,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
 
 /*
  * Dynamic MTD Partition support with mtdparts
@@ -718,12 +431,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * Environment Configuration
  */
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
 #define __USB_PHY_TYPE	utmi
 #define RAMDISKFILE	"t104xrdb/ramdisk.uboot"
 
@@ -739,20 +448,13 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define FDTFILE		"t1042rdb/t1042d4rdb.dtb"
 #endif
 
-#ifdef CONFIG_FSL_DIU_FB
-#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
-#else
-#define DIU_ENVIRONMENT
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"			\
 	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
-	"video-mode=" __stringify(DIU_ENVIRONMENT) "\0"		\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
+	"ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0"	\
 	"tftpflash=tftpboot $loadaddr $uboot && "		\
 	"protect off $ubootaddr +$filesize && "			\
 	"erase $ubootaddr +$filesize && "			\
@@ -766,40 +468,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	"fdtfile=" __stringify(FDTFILE) "\0"			\
 	"bdev=sda3\0"
 
-#define CONFIG_LINUX                       \
-	"setenv bootargs root=/dev/ram rw "            \
-	"console=$consoledev,$baudrate $othbootargs;"  \
-	"setenv ramdiskaddr 0x02000000;"               \
-	"setenv fdtaddr 0x00c00000;"		       \
-	"setenv loadaddr 0x1000000;"		       \
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_HDBOOT					\
-	"setenv bootargs root=/dev/$bdev rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND			\
-	"setenv bootargs root=/dev/nfs rw "	\
-	"nfsroot=$serverip:$rootpath "		\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND				\
-	"setenv bootargs root=/dev/ram rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $ramdiskaddr $ramdiskfile;"		\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
-
 #include <asm/fsl_secure_boot.h>
 
 #endif	/* __CONFIG_H */