X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT104xRDB.h;h=4b87e566cd4a6ad7b473e5e494f64b2deffa75ed;hb=69e173eb57d1f4848f070c83456096ba5d2ba1b4;hp=cd5b3e2adafcdbde17b57c6d21e7ee88b09844aa;hpb=c9feb427aba860ebc79f9851a1bb49cc456a2d48;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index cd5b3e2..4b87e56 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -12,7 +12,6 @@
  */
 #define CONFIG_T104xRDB
 #define CONFIG_PHYS_64BIT
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_E500			/* BOOKE e500 family */
@@ -451,7 +450,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
@@ -490,7 +488,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
@@ -539,8 +536,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
@@ -742,7 +737,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB)
+#elif defined(CONFIG_T1040D4RDB)
+#define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
+#elif defined(CONFIG_T1042D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
@@ -759,7 +756,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 #define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
 #ifdef CONFIG_T1040RDB
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x04
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x08
@@ -787,7 +784,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_CMD_DATE
 #endif
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
@@ -941,9 +937,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
-#define CONFIG_CMD_BLOB
-#endif
 
 #endif	/* __CONFIG_H */