X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT104xRDB.h;h=4485f40a6b3d9d875a9fc61723da863586249a7c;hb=b842340a108f463e66aaaca75c0831a224612190;hp=fb215bb05fbac357e59e1e7074e0681173b44c7c;hpb=abc784185475ad0d61a8d38f451f2fb8842e7f88;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index fb215bb..4485f40 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -15,14 +15,6 @@
 #include <asm/config_mpc85xx.h>
 
 #ifdef CONFIG_RAMBOOT_PBL
-
-#ifndef CONFIG_NXP_ESBC
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_PBI \
-		$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
-#endif
-
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_PAD_TO		0x40000
 #define CONFIG_SPL_MAX_SIZE		0x28000
@@ -49,26 +41,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -81,26 +53,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -112,26 +64,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
-#endif
 #endif
 
 #endif
@@ -164,7 +96,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 #define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	66666666
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -173,9 +104,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
 #endif
 
@@ -211,8 +140,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
-#define CONFIG_DDR_SPD
-
 #define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x51
 
@@ -309,7 +236,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_CS2_FTIM3		0x0
 
 /* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_BASE		0xff800000
 #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
 
@@ -328,8 +254,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 				| CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
 					FTIM0_NAND_TWP(0x18)   | \
@@ -348,8 +272,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
-
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
@@ -421,7 +343,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -452,26 +373,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 /* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_FSL_I2C_SPEED	400000	/* I2C speed in Hz */
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C3_SPEED	400000
-#define CONFIG_SYS_FSL_I2C4_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET	0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET	0x119100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
-#endif
 
-#define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
 #define I2C_MUX_CH_DEFAULT      0x8
@@ -613,8 +515,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
 #endif
@@ -623,8 +523,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_QE_FW_ADDR		0x130000
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_QE_FW_ADDR		(512 * 0x920)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_QE_FW_ADDR		(7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
 #endif
@@ -676,7 +574,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -686,10 +583,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Dynamic MTD Partition support with mtdparts
  */
@@ -701,9 +594,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
 #define __USB_PHY_TYPE	utmi
 #define RAMDISKFILE	"t104xrdb/ramdisk.uboot"
 
@@ -746,7 +636,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	"fdtfile=" __stringify(FDTFILE) "\0"			\
 	"bdev=sda3\0"
 
-#define CONFIG_LINUX                       \
+#define LINUXBOOTCOMMAND                       \
 	"setenv bootargs root=/dev/ram rw "            \
 	"console=$consoledev,$baudrate $othbootargs;"  \
 	"setenv ramdiskaddr 0x02000000;"               \
@@ -754,14 +644,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	"setenv loadaddr 0x1000000;"		       \
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_HDBOOT					\
+#define HDBOOT					\
 	"setenv bootargs root=/dev/$bdev rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"tftp $loadaddr $bootfile;"			\
 	"tftp $fdtaddr $fdtfile;"			\
 	"bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_NFSBOOTCOMMAND			\
+#define NFSBOOTCOMMAND			\
 	"setenv bootargs root=/dev/nfs rw "	\
 	"nfsroot=$serverip:$rootpath "		\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
@@ -770,7 +660,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	"tftp $fdtaddr $fdtfile;"		\
 	"bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND				\
+#define RAMBOOTCOMMAND				\
 	"setenv bootargs root=/dev/ram rw "		\
 	"console=$consoledev,$baudrate $othbootargs;"	\
 	"tftp $ramdiskaddr $ramdiskfile;"		\
@@ -778,7 +668,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 	"tftp $fdtaddr $fdtfile;"			\
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
+#define CONFIG_BOOTCOMMAND		LINUXBOOTCOMMAND
 
 #include <asm/fsl_secure_boot.h>