X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT1040QDS.h;h=da06bfd27a3230e1d22ca8d6eca6d9e6cbfc83a6;hb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;hp=9e151da16a48bc3a5883693b1aea18c69b582b52;hpb=f1993ca066100fcaba7d49fecae0ef604e5807e2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 9e151da..da06bfd 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -411,10 +411,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 /* Video */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
@@ -435,15 +431,6 @@ unsigned long get_board_ddr_clk(void);
 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
@@ -463,7 +450,6 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_PCA_ADDR		0x77
 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
 
-
 /* I2C bus multiplexer */
 #define I2C_MUX_CH_DEFAULT      0x8
 #define I2C_MUX_CH_DIU		0xC
@@ -482,7 +468,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -575,7 +560,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
@@ -686,7 +670,7 @@ unsigned long get_board_ddr_clk(void);
 
 /* Enable VSC9953 L2 Switch driver */
 #define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x14
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x18
 
@@ -717,14 +701,11 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -835,9 +816,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
-#define CONFIG_CMD_BLOB
-#endif
 
 #endif	/* __CONFIG_H */