X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT1040QDS.h;h=b8c6e89f4edacd38582142b12757ca5a66e4fad3;hb=bb6b142fc16713bb83e471912e614ac01eec4584;hp=4b735b5494087fa301e81dca94d0308de8762dd4;hpb=a69fdc7787bfa2f27eed74c2ee58c28ce932d502;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 4b735b5..b8c6e89 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -27,8 +27,6 @@ * T1040 QDS board configuration file */ #define CONFIG_T1040QDS -#define CONFIG_PHYS_64BIT -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_RAMBOOT_PBL @@ -66,10 +64,10 @@ #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ #define CONFIG_PCI /* Enable PCI/PCIE */ #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCIE1 /* PCIE controler 1 */ -#define CONFIG_PCIE2 /* PCIE controler 2 */ -#define CONFIG_PCIE3 /* PCIE controler 3 */ -#define CONFIG_PCIE4 /* PCIE controler 4 */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE2 /* PCIE controller 2 */ +#define CONFIG_PCIE3 /* PCIE controller 3 */ +#define CONFIG_PCIE4 /* PCIE controller 4 */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ @@ -399,7 +397,6 @@ unsigned long get_board_ddr_clk(void); * shorted - index 1 */ #define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) @@ -413,10 +410,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - /* Video */ #define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB @@ -437,15 +430,6 @@ unsigned long get_board_ddr_clk(void); #undef CONFIG_SYS_FLASH_EMPTY_INFO #endif -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* new uImage format support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ @@ -465,7 +449,6 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR 0x77 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ - /* I2C bus multiplexer */ #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH_DIU 0xC @@ -484,11 +467,6 @@ unsigned long get_board_ddr_clk(void); /* * eSPI - Enhanced SPI */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -569,7 +547,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LBA48 #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 #endif /* @@ -581,11 +558,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_EHCI #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 #endif #endif @@ -593,12 +568,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_FSL_ESDHC_ADAPTER_IDENT #endif /* Qman/Bman */ @@ -690,7 +664,7 @@ unsigned long get_board_ddr_clk(void); /* Enable VSC9953 L2 Switch driver */ #define CONFIG_VSC9953 -#define CONFIG_VSC9953_CMD +#define CONFIG_CMD_ETHSW #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 @@ -721,14 +695,9 @@ unsigned long get_board_ddr_clk(void); * Command line configuration. */ #define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ERRATA -#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -779,7 +748,6 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 @@ -801,7 +769,7 @@ unsigned long get_board_ddr_clk(void); "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=t1040qds/ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ + "fdtaddr=1e00000\0" \ "fdtfile=t1040qds/t1040qds.dtb\0" \ "bdev=sda3\0" @@ -839,9 +807,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include -#define CONFIG_CMD_BLOB -#endif #endif /* __CONFIG_H */