X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT1040QDS.h;h=9f5063c33378438b607ff6be1349e2178beaf1d7;hb=6beacfcff81bdc04c10a440971b0fb683ee57534;hp=aa0f802233ac0d6194b5fa20536a3ce09e0c031f;hpb=312a6c016a2d81aa3fbc605f5c0c315b6a4e3464;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index aa0f802..9f5063c 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -65,10 +65,10 @@
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
-#define CONFIG_PCIE4			/* PCIE controler 4 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
+#define CONFIG_PCIE4			/* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
@@ -411,10 +411,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 /* Video */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
@@ -454,7 +450,6 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_PCA_ADDR		0x77
 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
 
-
 /* I2C bus multiplexer */
 #define I2C_MUX_CH_DEFAULT      0x8
 #define I2C_MUX_CH_DIU		0xC
@@ -473,7 +468,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -554,7 +548,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -566,11 +559,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 #endif
 
@@ -580,10 +571,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
@@ -677,7 +665,7 @@ unsigned long get_board_ddr_clk(void);
 
 /* Enable VSC9953 L2 Switch driver */
 #define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x14
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x18
 
@@ -708,14 +696,9 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -766,7 +749,6 @@ unsigned long get_board_ddr_clk(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE	115200