X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FT102xQDS.h;h=2e3a8c1184c2edf54ac69a44d6bff399cf2e141f;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=7417ff4d31218c45d2d65615ba3d75a0a483ffec;hpb=af27382e2d6f7b4966e6932c9820939259498c1b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 7417ff4..2e3a8c1 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -12,9 +12,6 @@
 #define __T1024QDS_H
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_MP			/* support multiple processors */
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -25,24 +22,16 @@
 #endif
 
 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DEEP_SLEEP
-#if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
-
-#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
@@ -53,7 +42,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #ifdef CONFIG_NAND
@@ -106,7 +94,7 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -153,7 +141,6 @@
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #if defined(CONFIG_SPIFLASH)
@@ -253,9 +240,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 #define CONFIG_DDR_SPD
-#ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3
-#endif
 
 #define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x51
@@ -497,12 +481,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 
 /* Video */
-#ifdef CONFIG_PPC_T1024		/* no DIU on T1023 */
+#ifdef CONFIG_ARCH_T1024		/* no DIU on T1023 */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
@@ -630,9 +613,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 #endif
 
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /*
@@ -647,8 +628,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -657,7 +636,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_HAS_FSL_DR_USB
 
 #ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
@@ -665,12 +643,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * SDHC
  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Qman/Bman */
@@ -780,7 +755,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_CMD_MTDPARTS
@@ -803,10 +778,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -848,7 +819,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	"u-boot.bin" /* U-Boot image on TFTP server */
 #define CONFIG_LOADADDR		1000000 /* default location for tftp, bootm */
-#define CONFIG_BAUDRATE		115200
 #define __USB_PHY_TYPE		utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
@@ -891,12 +861,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND	CONFIG_LINUX
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif	/* __T1024QDS_H */