X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FSX1.h;h=01c2b3d50ce5f6720500dabfe181b412d333962e;hb=22a9ea974bdf18e6adad5c4f80b1c60ef384690c;hp=fd1a3bdd5360a163c3f2a9656e8ca02dca707938;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index fd1a3bd..01c2b3d 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -47,7 +47,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -116,7 +115,9 @@
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTARGS		"mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw"
+#ifdef CONFIG_STDOUT_USBTTY
 #define CONFIG_PREBOOT		"setenv stdout usbtty;setenv stdin usbtty"
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -131,16 +132,14 @@
 #define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
-#define CONFIG_SYS_TIMERBASE	0xFFFEC500	    /* use timer 1 */
-#define CONFIG_SYS_PVT		7		    /* 2^(pvt+1), divide by 256 */
-#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
+#define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ		1000
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -167,15 +166,19 @@
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
+ * V1
+ * PHYS_FLASH_SIZE_1			(16 << 10)	16 MB
+ * PHYS_FLASH_SIZE_2			(8 << 10)	 8 MB
+ * V2 only 1 flash
+ * PHYS_FLASH_SIZE_1			(32 << 10)	32 MB
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define PHYS_FLASH_SIZE		(16 << 10) /* 16 MB */
 #define PHYS_FLASH_SECT_SIZE	(128*1024) /* Size of a sector (128kB) */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(256)	/* max number of sectors on one chip */
 #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
 #define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 }
 
 /*-----------------------------------------------------------------------
  * FLASH driver setup