X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FSBx81LIFKW.h;h=ec0c531c4623d8270000ef7be6d63e3e3fba9cc5;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=667fd43ea8050450eaa9d247dd9a6f68fe6aba3f;hpb=719afeb0b3c60af82f701f122978b935aa6a5217;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h
index 667fd43..ec0c531 100644
--- a/include/configs/SBx81LIFKW.h
+++ b/include/configs/SBx81LIFKW.h
@@ -13,7 +13,6 @@
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 #define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
-#define CONFIG_BUILD_TARGET	"u-boot.kwb"
 
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
@@ -24,8 +23,6 @@
 #define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 #define CONFIG_KIRKWOOD_GPIO	1
 
-#define CONFIG_MISC_INIT_R		/* call misc_init_r */
-
 /*
  * NS16550 Configuration
  */
@@ -41,8 +38,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
@@ -59,13 +54,6 @@
 /*
  *  Environment variables configurations
  */
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		20000000	/* 20Mhz */
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256K */
-#define CONFIG_ENV_SIZE			0x02000
-#define CONFIG_ENV_OFFSET		0xc0000		/* env starts here - 768K */
 
 /*
  * U-Boot bootcode configuration
@@ -90,9 +78,6 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
 
 /*
@@ -101,7 +86,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_NETCONSOLE	/* include NetConsole support */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi over miiphy interface */
 #define CONFIG_MVGBE	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable a single port */
 #define CONFIG_PHY_BASE_ADR	0x01