X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FSBC8540.h;h=b91dc4bd26d5688a50edb45b020c521335b254ae;hb=37a3bda0c9c8a2ffbf7e2a9e121177a3385a0626;hp=34196319c5a48404746cec872640c90886165a58;hpb=7f202217356f19e519e6ec57a29de9af73067037;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 3419631..b91dc4b 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -24,27 +24,32 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+/*
+ * sbc8540 board configuration file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if XXX
-#define DEBUG		      /* General debug */
-#define ET_DEBUG
+/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_66
+#define CONFIG_PCI_66
 #endif
+
 #define TSEC_DEBUG
 
-/* High Level Configuration Options */
+/*
+ * High Level Configuration Options
+ */
 #define CONFIG_BOOKE		1	/* BOOKE			*/
 #define CONFIG_E500		1	/* BOOKE e500 family		*/
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
 #define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfffc0000
+
 
 #define CONFIG_CPM2		1	/* has CPM2 */
 
@@ -77,6 +82,7 @@
 #undef	CONFIG_BTB			    /* toggle branch predition	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
+#define CONFIG_RESET_PHY_R	1	    /* Call reset_phy() */
 
 #undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
 #define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
@@ -201,7 +207,6 @@
 #undef	CONFIG_CONS_NONE			/* define if console on something else */
 
 #define CONFIG_CONS_INDEX     1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -286,6 +291,10 @@
    * GPIO pins used for bit-banged MII communications
    */
   #define MDIO_PORT	2		/* Port C */
+  #define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+  #define MDC_DECLARE	MDIO_DECLARE
+
   #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
   #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
   #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
@@ -317,7 +326,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
@@ -372,6 +381,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -382,7 +392,7 @@
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif
 
@@ -412,14 +422,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */