X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FSBC8540.h;h=5d424dd75f42f9aedd676e1c0eef73db085c20cc;hb=3df4f46f3209c067dcadc969ed02d27c97fa3632;hp=48c9339802bc3948d026068ce495bfcd252f402f;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 48c9339..5d424dd 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -24,22 +24,25 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+/*
+ * sbc8540 board configuration file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if XXX
-#define DEBUG		      /* General debug */
-#define ET_DEBUG
+/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_MK_66
+#define CONFIG_PCI_66
 #endif
+
 #define TSEC_DEBUG
 
-/* High Level Configuration Options */
+/*
+ * High Level Configuration Options
+ */
 #define CONFIG_BOOKE		1	/* BOOKE			*/
 #define CONFIG_E500		1	/* BOOKE e500 family		*/
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
@@ -75,9 +78,9 @@
 /* below can be toggled for performance analysis. otherwise use default */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
 #undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
+#define CONFIG_RESET_PHY_R	1	    /* Call reset_phy() */
 
 #undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
 #define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
@@ -186,7 +189,6 @@
 #define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
@@ -288,6 +290,10 @@
    * GPIO pins used for bit-banged MII communications
    */
   #define MDIO_PORT	2		/* Port C */
+  #define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+  #define MDC_DECLARE	MDIO_DECLARE
+
   #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
   #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
   #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
@@ -374,6 +380,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -384,7 +391,7 @@
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif