X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FRPXsuper.h;h=ec891e4ca37d5a1a80895ec5dba6457f48d87711;hb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;hp=45907aa0e79f562d05e820f80fcf967445875e55;hpb=795bee849603c7c2994ba20fcd96f3f9835ffd96;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 45907aa..ec891e4 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -8,7 +8,7 @@ * *****************************************************************************/ /* for the AY-Revision which does not use the HRCW */ -#define CFG_DEFAULT_IMMR 0x00010000 +#define CONFIG_SYS_DEFAULT_IMMR 0x00010000 /* What is the oscillator's (UX2) frequency in Hz? */ #define CONFIG_8260_CLKIN (66 * 1000 * 1000) @@ -16,7 +16,7 @@ /* How is switch S2 set? We really only want the MODCK[1-3] bits, so * only the 3 least significant bits are important. */ -#define CFG_SBC_S2 0x04 +#define CONFIG_SYS_SBC_S2 0x04 /* What should MODCK_H be? It is dependent on the oscillator * frequency, MODCK[1-3], and desired CPM and core frequencies. @@ -28,45 +28,45 @@ * 0x5 0x5 66 133 133 * 0x5 0x7 66 133 200 */ -#define CFG_SBC_MODCK_H 0x06 +#define CONFIG_SYS_SBC_MODCK_H 0x06 -#define CFG_SBC_BOOT_LOW 1 /* only for HRCW */ -#undef CFG_SBC_BOOT_LOW +#define CONFIG_SYS_SBC_BOOT_LOW 1 /* only for HRCW */ +#undef CONFIG_SYS_SBC_BOOT_LOW /* What should the base address of the main FLASH be and how big is - * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk + * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk * The main FLASH is whichever is connected to *CS0. U-Boot expects * this to be the SIMM. */ -#define CFG_FLASH0_BASE 0x80000000 -#define CFG_FLASH0_SIZE 16 +#define CONFIG_SYS_FLASH0_BASE 0x80000000 +#define CONFIG_SYS_FLASH0_SIZE 16 /* What should the base address of the secondary FLASH be and how big * is it (in Mbytes)? The secondary FLASH is whichever is connected * to *CS6. U-Boot expects this to be the on board FLASH. If you don't * want it enabled, don't define these constants. */ -#define CFG_FLASH1_BASE 0 -#define CFG_FLASH1_SIZE 0 -#undef CFG_FLASH1_BASE -#undef CFG_FLASH1_SIZE +#define CONFIG_SYS_FLASH1_BASE 0 +#define CONFIG_SYS_FLASH1_SIZE 0 +#undef CONFIG_SYS_FLASH1_BASE +#undef CONFIG_SYS_FLASH1_SIZE /* What should be the base address of SDRAM DIMM and how big is * it (in Mbytes)? */ -#define CFG_SDRAM0_BASE 0x00000000 -#define CFG_SDRAM0_SIZE 64 +#define CONFIG_SYS_SDRAM0_BASE 0x00000000 +#define CONFIG_SYS_SDRAM0_SIZE 64 /* What should be the base address of SDRAM DIMM and how big is * it (in Mbytes)? */ -#define CFG_SDRAM1_BASE 0x04000000 -#define CFG_SDRAM1_SIZE 32 +#define CONFIG_SYS_SDRAM1_BASE 0x04000000 +#define CONFIG_SYS_SDRAM1_SIZE 32 /* What should be the base address of the LEDs and switch S0? * If you don't want them enabled, don't define this. */ -#define CFG_LED_BASE 0x00000000 +#define CONFIG_SYS_LED_BASE 0x00000000 /* * select serial console configuration @@ -91,8 +91,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -107,19 +106,19 @@ * - RAM for BD/Buffers is on the 60x Bus (see 28-13) * - Enable Half Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CFG_CPMFCR_RAMTYPE 0 -/*#define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) */ -# define CFG_FCC_PSMR 0 +# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) +# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) +# define CONFIG_SYS_CPMFCR_RAMTYPE 0 +/*#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) */ +# define CONFIG_SYS_FCC_PSMR 0 #else /* CONFIG_ETHER_INDEX */ # error "on RPX Super ethernet must be FCC3" #endif /* CONFIG_ETHER_INDEX */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* Define this to reserve an entire FLASH sector (256 KB) for @@ -127,7 +126,7 @@ * put in the same sector as U-Boot, and changing variables * will erase U-Boot temporarily */ -#define CFG_ENV_IN_OWN_SECT +#define CONFIG_ENV_IN_OWN_SECT /* Define to allow the user to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -145,24 +144,39 @@ #define CONFIG_BOOTDELAY -1 /* undef this to save memory */ -#define CFG_LONGHELP +#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CFG_PROMPT "=> " +#define CONFIG_SYS_PROMPT "=> " + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_KGDB -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO & \ - ~CFG_CMD_KGDB ) /* Where do the internal registers live? */ -#define CFG_IMMR 0xF0000000 +#define CONFIG_SYS_IMMR 0xF0000000 /* Where do the on board registers (CS4) live? */ -#define CFG_REGS_BASE 0xFA000000 +#define CONFIG_SYS_REGS_BASE 0xFA000000 /***************************************************************************** * @@ -175,36 +189,34 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CFG_MAXARGS 8 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 8 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x04000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x06000000 /* 64-96 MB in SDRAM */ +#define CONFIG_SYS_MEMTEST_START 0x04000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x06000000 /* 64-96 MB in SDRAM */ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings @@ -212,106 +224,106 @@ * You should know what you are doing if you make changes here. */ -#define CFG_FLASH_BASE CFG_FLASH0_BASE -#define CFG_SDRAM_BASE CFG_SDRAM0_BASE +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM0_BASE /*----------------------------------------------------------------------- * Hard Reset Configuration Words */ -#if defined(CFG_SBC_BOOT_LOW) -# define CFG_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS) +#if defined(CONFIG_SYS_SBC_BOOT_LOW) +# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS) #else -# define CFG_SBC_HRCW_BOOT_FLAGS (0) -#endif /* defined(CFG_SBC_BOOT_LOW) */ +# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (0) +#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */ -/* get the HRCW ISB field from CFG_IMMR */ -#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\ - ((CFG_IMMR & 0x01000000) >> 7) |\ - ((CFG_IMMR & 0x00100000) >> 4) ) +/* get the HRCW ISB field from CONFIG_SYS_IMMR */ +#define CONFIG_SYS_SBC_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) |\ + ((CONFIG_SYS_IMMR & 0x01000000) >> 7) |\ + ((CONFIG_SYS_IMMR & 0x00100000) >> 4) ) -#define CFG_HRCW_MASTER (HRCW_BPS11 |\ +#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11 |\ HRCW_DPPC11 |\ - CFG_SBC_HRCW_IMMR |\ + CONFIG_SYS_SBC_HRCW_IMMR |\ HRCW_MMR00 |\ HRCW_LBPC11 |\ HRCW_APPC10 |\ HRCW_CS10PC00 |\ - (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) |\ - CFG_SBC_HRCW_BOOT_FLAGS) + (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111) |\ + CONFIG_SYS_SBC_HRCW_BOOT_FLAGS) /* no slaves */ -#define CFG_HRCW_SLAVE1 0 -#define CFG_HRCW_SLAVE2 0 -#define CFG_HRCW_SLAVE3 0 -#define CFG_HRCW_SLAVE4 0 -#define CFG_HRCW_SLAVE5 0 -#define CFG_HRCW_SLAVE6 0 -#define CFG_HRCW_SLAVE7 0 +#define CONFIG_SYS_HRCW_SLAVE1 0 +#define CONFIG_SYS_HRCW_SLAVE2 0 +#define CONFIG_SYS_HRCW_SLAVE3 0 +#define CONFIG_SYS_HRCW_SLAVE4 0 +#define CONFIG_SYS_HRCW_SLAVE5 0 +#define CONFIG_SYS_HRCW_SLAVE6 0 +#define CONFIG_SYS_HRCW_SLAVE7 0 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 - * Note also that the logic that sets CFG_RAMBOOT is platform dependent. + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent. */ -#define CFG_MONITOR_BASE (CFG_FLASH0_BASE + 0x00F00000) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH0_BASE + 0x00F00000) -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ -#ifndef CFG_RAMBOOT -# define CFG_ENV_IS_IN_FLASH 1 +#ifndef CONFIG_SYS_RAMBOOT +# define CONFIG_ENV_IS_IN_FLASH 1 -# ifdef CFG_ENV_IN_OWN_SECT -# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) -# define CFG_ENV_SECT_SIZE 0x40000 +# ifdef CONFIG_ENV_IN_OWN_SECT +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) +# define CONFIG_ENV_SECT_SIZE 0x40000 # else -# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE) -# define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -# define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */ -# endif /* CFG_ENV_IN_OWN_SECT */ +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE) +# define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +# define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */ +# endif /* CONFIG_ENV_IN_OWN_SECT */ #else -# define CFG_ENV_IS_IN_NVRAM 1 -# define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) -# define CFG_ENV_SIZE 0x200 -#endif /* CFG_RAMBOOT */ +# define CONFIG_ENV_IS_IN_NVRAM 1 +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +# define CONFIG_ENV_SIZE 0x200 +#endif /* CONFIG_SYS_RAMBOOT */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -324,30 +336,30 @@ * * HID1 has only read-only information - nothing to set. */ -#define CFG_HID0_INIT (/*HID0_ICE |*/\ +#define CONFIG_SYS_HID0_INIT (/*HID0_ICE |*/\ /*HID0_DCE |*/\ HID0_ICFI |\ HID0_DCI |\ HID0_IFEM |\ HID0_ABE) -#define CFG_HID0_FINAL (/*HID0_ICE |*/\ +#define CONFIG_SYS_HID0_FINAL (/*HID0_ICE |*/\ HID0_IFEM |\ HID0_ABE |\ HID0_EMCP) -#define CFG_HID2 0 +#define CONFIG_SYS_HID2 0 /*----------------------------------------------------------------------- * RMR - Reset Mode Register *----------------------------------------------------------------------- */ -#define CFG_RMR 0 +#define CONFIG_SYS_RMR 0 /*----------------------------------------------------------------------- * BCR - Bus Configuration 4-25 *----------------------------------------------------------------------- */ -#define CFG_BCR (BCR_EBM |\ +#define CONFIG_SYS_BCR (BCR_EBM |\ BCR_PLDP |\ BCR_EAV |\ BCR_NPQM0) @@ -357,7 +369,7 @@ *----------------------------------------------------------------------- */ -#define CFG_SIUMCR (SIUMCR_L2CPC01 |\ +#define CONFIG_SYS_SIUMCR (SIUMCR_L2CPC01 |\ SIUMCR_APPC10 |\ SIUMCR_CS10PC01) @@ -368,7 +380,7 @@ *----------------------------------------------------------------------- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable */ -#define CFG_SYPCR (SYPCR_SWTC |\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC |\ SYPCR_BMT |\ SYPCR_PBME |\ SYPCR_LBME |\ @@ -381,7 +393,7 @@ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, * and enable Time Counter */ -#define CFG_TMCNTSC (TMCNTSC_SEC |\ +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\ TMCNTSC_ALR |\ TMCNTSC_TCF |\ TMCNTSC_TCE) @@ -392,7 +404,7 @@ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable * Periodic timer */ -#define CFG_PISCR (PISCR_PS |\ +#define CONFIG_SYS_PISCR (PISCR_PS |\ PISCR_PTF |\ PISCR_PTE) @@ -400,13 +412,13 @@ * SCCR - System Clock Control 9-8 *----------------------------------------------------------------------- */ -#define CFG_SCCR (SCCR_DFBRG01) +#define CONFIG_SYS_SCCR (SCCR_DFBRG01) /*----------------------------------------------------------------------- * RCCR - RISC Controller Configuration 13-7 *----------------------------------------------------------------------- */ -#define CFG_RCCR 0 +#define CONFIG_SYS_RCCR 0 /* * Init Memory Controller: @@ -430,13 +442,13 @@ /* Bank 0 - FLASH * */ -#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ BRx_DECC_NONE |\ BRx_MS_GPCM_P |\ BRx_V) -#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\ ORxG_CSNT |\ ORxG_ACS_DIV1 |\ ORxG_SCY_6_CLK |\ @@ -445,48 +457,48 @@ /* Bank 1 - SDRAM * */ -#define CFG_BR1_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ BRx_MS_SDRAM_P |\ BRx_V) -#define CFG_OR1_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\ ORxS_BPD_4 |\ ORxS_ROWST_PBI0_A8 |\ ORxS_NUMR_12 |\ ORxS_IBID) -#define CFG_PSDMR 0x014DA412 -#define CFG_PSRT 0x79 +#define CONFIG_SYS_PSDMR 0x014DA412 +#define CONFIG_SYS_PSRT 0x79 /* Bank 2 - SDRAM * */ -#define CFG_BR2_PRELIM ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM1_BASE & BRx_BA_MSK) |\ BRx_PS_32 |\ BRx_MS_SDRAM_L |\ BRx_V) -#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM1_SIZE) |\ +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM1_SIZE) |\ ORxS_BPD_4 |\ ORxS_ROWST_PBI0_A9 |\ ORxS_NUMR_12) -#define CFG_LSDMR 0x0169A512 -#define CFG_LSRT 0x79 +#define CONFIG_SYS_LSDMR 0x0169A512 +#define CONFIG_SYS_LSRT 0x79 -#define CFG_MPTPR (0x0800 & MPTPR_PTP_MSK) +#define CONFIG_SYS_MPTPR (0x0800 & MPTPR_PTP_MSK) /* Bank 4 - On board registers * */ -#define CFG_BR4_PRELIM ((CFG_REGS_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_REGS_BASE & BRx_BA_MSK) |\ BRx_PS_8 |\ BRx_MS_GPCM_P |\ BRx_V) -#define CFG_OR4_PRELIM (ORxG_AM_MSK |\ +#define CONFIG_SYS_OR4_PRELIM (ORxG_AM_MSK |\ ORxG_CSNT |\ ORxG_ACS_DIV1 |\ ORxG_SCY_5_CLK |\