X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPPChameleonEVB.h;h=09f3544ae0711c670803245ef5584c4dc7e0b36d;hb=5e7abce99163a00b8d267cc8045f06b498728288;hp=16baf8c9be79184c9b4271c939f393ce31c7260f;hpb=68d7d65100e84df00bca971c114092731b441090;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 16baf8c..09f3544 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -210,6 +210,7 @@
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
+
 /*
  * nand device 1 on dave (PPChameleonEVB) needs more time,
  * so we just introduce additional wait in nand_wait(),
@@ -309,32 +310,6 @@
 	} \
 } while(0)
 
-#if 0
-#define SECTORSIZE 512
-#define NAND_NO_RB
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#ifdef NAND_NO_RB
-/* constant delay (see also tR in the datasheet) */
-#define NAND_WAIT_READY(nand) do { \
-	udelay(12); \
-} while (0)
-#else
-/* use the R/B pin */
-/* TBD */
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-#endif
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -439,6 +414,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
@@ -601,17 +577,6 @@
 #define		DIMM_READ_ADDR 0xAB
 #define		DIMM_WRITE_ADDR 0xAA
 
-#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register		*/
-#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register	*/
-#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register		*/
-#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register	*/
-#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register		*/
-#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register		*/
-#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register		*/
-#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register			*/
-#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR				*/
-#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register		*/
-
 /* Defines for CPC0_PLLMR1 Register fields */
 #define PLL_ACTIVE		0x80000000
 #define CPC0_PLLMR1_SSCS	0x80000000