X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPMC440.h;h=a5f35e29478671ab3cfd497e76a28dbac8660c79;hb=f18fa31cdcfeecaf56e61224eb18d2f2b6d39d85;hp=022764932d7c04e745fa4e980b0f44e60ca05cc8;hpb=09f3ca3dd53b671b009ddc4e1dad669c280094f0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 0227649..a5f35e2 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -29,15 +29,12 @@
 #define CONFIG_SYS_TEXT_BASE	0xFFF90000
 #endif
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CONFIG_SYS_CLK_FREQ	33333400
 
 #if 0 /* temporary disabled because OS/9 does not like dcache on startup */
 #define CONFIG_4xx_DCACHE		/* enable dcache        */
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_F	1
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r     */
 #define CONFIG_BOARD_TYPES	1	/* support board types  */
@@ -84,7 +81,6 @@
  * Serial Port
  *----------------------------------------------------------------------*/
 #define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -159,8 +155,6 @@
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_1		400000
 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_1		0x7F
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
@@ -232,7 +226,6 @@
 		"cp.b 200000 fff90000 70000\0"				\
 	""
 
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds     */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
@@ -253,7 +246,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 
 #define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
@@ -266,22 +258,15 @@
 #define USB_2_0_DEVICE
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 
 /* POST support */
@@ -297,8 +282,6 @@
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
-
 #define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
@@ -321,18 +304,13 @@
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
-#define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
  *----------------------------------------------------------------------*/
 /* General PCI */
-#define CONFIG_PCI		/* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP		/* do (not) pci plug-and-play   */
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE	0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
@@ -409,10 +387,6 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define CONFIG_API		1
 
 #endif /* __CONFIG_H */