X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPMC405DE.h;h=619222fed7dc65137983c238cd7ab6c4cd94249f;hb=2fbb8462b0e18893b4b739705db047ffda82d4fc;hp=94b95475a8b01b303a95d88ea95ed48e74c4c4b6;hpb=1a0afe1fad4cc1941cae681e6036ea7a576a833e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 94b9547..619222f 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -12,6 +12,7 @@
 #define CONFIG_PMC405DE		1	/* ...on a PMC405DE board	*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
@@ -20,7 +21,6 @@
 #define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
 
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
 #undef  CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
@@ -52,23 +52,12 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef  CONFIG_WATCHDOG			/* watchdog disabled */
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
@@ -91,7 +80,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX	2	/* Use UART1			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -103,17 +91,9 @@
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
-#define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CONFIG_AUTOBOOT_KEYED	1
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 /*
  * PCI stuff
  */
@@ -175,7 +155,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO	1 /* 'E' for empty sector (flinfo) */
 #define CONFIG_SYS_FLASH_QUIET_TEST	1 /* don't warn upon unknown flash */
 
-
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)