X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPMC405DE.h;h=5c3f56682cf48d65f59d43161fc58e594fb86731;hb=02ccab1908c405fe1449457d4a0d343784a30acb;hp=2f35ca9417cdf8e3222814b4b0a572b1e9b6f954;hpb=858dbdf8412cefb6dbc4eed63dc3de9744578455;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 2f35ca9..5c3f566 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -12,18 +12,12 @@
 #define CONFIG_PMC405DE		1	/* ...on a PMC405DE board	*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
 #define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
 
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
 #undef  CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
 
@@ -57,16 +51,9 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef  CONFIG_WATCHDOG			/* watchdog disabled */
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
@@ -83,13 +70,11 @@
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 
 #define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console info */
 
 #define CONFIG_SYS_MEMTEST_START	0x0100000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX	2	/* Use UART1			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -101,10 +86,7 @@
 #define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
-#define CONFIG_LOOPW		1	/* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 /*
  * PCI stuff
@@ -113,10 +95,8 @@
 #define PCI_HOST_FORCE		1	/* configure as pci host	*/
 #define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/
 
-#define CONFIG_PCI		/* include pci support			*/
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST	PCI_HOST_AUTO  /* select pci host function	*/
-#define CONFIG_PCI_PNP		/* do (not) pci plug-and-play		*/
 
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup		*/
 
@@ -167,7 +147,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO	1 /* 'E' for empty sector (flinfo) */
 #define CONFIG_SYS_FLASH_QUIET_TEST	1 /* don't warn upon unknown flash */
 
-
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)