X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPLU405.h;h=b8f23d769c36a2774e7166704d22b33704d6f3f3;hb=821560fd8e43eecc208c1c52ad24faadb6b52703;hp=a868ec960faa1f19b21b1d94519eb37a431aedaa;hpb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index a868ec9..b8f23d7 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -21,15 +21,11 @@
 #define CONFIG_PLU405		1	/* ...on a PLU405 board		*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF80000
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
 
 #define CONFIG_SYS_CLK_FREQ     33333400 /* external frequency to pll   */
 
-#define CONFIG_BAUDRATE		9600
-
 #undef	CONFIG_BOOTARGS
 #undef	CONFIG_BOOTCOMMAND
 
@@ -59,16 +55,7 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_EEPROM
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -95,8 +82,6 @@
 
 #define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
-
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
 #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
@@ -119,10 +104,6 @@
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
@@ -148,10 +129,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
 					/* resource configuration       */
 
 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
@@ -171,7 +150,6 @@
 /*
  * IDE/ATA stuff
  */
-#undef	CONFIG_IDE_8xx_DIRECT		    /* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
@@ -376,12 +354,10 @@
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ohci_pci"
-#define CONFIG_USB_STORAGE	1
 
 /*
  * UBI
  */
-#define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS