X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPIP405.h;h=6e8d7ada192909eb16ea97ce4350daec9401abd8;hb=abbb90666d5ef2f500ebbedbb80ff60adc56b043;hp=0a2d7d7f9d47f8358b39ce68cd3f8eb09fe3a3a9;hpb=acf0269779422f3e147d2ddfb499c9f6ff10ad5e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 0a2d7d7..6e8d7ad 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -42,6 +42,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
@@ -68,7 +77,7 @@
 #define CONFIG_CMD_BSP
 
 
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define	 CFG_HUSH_PARSER
 #define	 CFG_PROMPT_HUSH_PS2 "> "
@@ -86,15 +95,14 @@
 
 #define CFG_I2C_EEPROM_ADDR	0x53
 #define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */
 
 #undef CFG_I2C_EEPROM_ADDR_OVERFLOW
 #define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
 					/* 64 byte page write mode using*/
 					/* last	6 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* enable Page write */
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 
@@ -114,7 +122,7 @@
 #define CONFIG_BOOTDELAY	5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME	-10	/XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK  	/* check console even if bootdelay = 0 */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check console even if bootdelay = 0 */
 
 
 #define CONFIG_BOOTCOMMAND	"diskboot 400000 0:1; bootm" /* autoboot command		*/
@@ -222,15 +230,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  */
@@ -252,7 +251,7 @@
 #define CFG_TEMP_STACK_OCM	1
 #define CFG_OCM_DATA_ADDR	0xF0000000
 #define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR 	/* inside of On Chip SRAM    */
+#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
 #define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
 #define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
@@ -281,7 +280,6 @@
  ***********************************************************/
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_CS8952_PHY	1	/* its a CS8952 PHY		*/
 /************************************************************
  * RTC
  ***********************************************************/