X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPIP405.h;h=6c74b00cd599a383ae148fbd0bbd0a0861fe6f51;hb=c9032ce168c1344fe8ffe8604825ec343ec14adf;hp=29888b4e1c272d917a2ca704dd34dc6b1dfe1b38;hpb=93b7b7fdadbbdcfacffab30a972774fa9ef8afb5;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 29888b4..6c74b00 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PIP405 1 /* ...on a PIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 @@ -27,7 +26,6 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - /* * BOOTP options */ @@ -36,33 +34,19 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#include - #define CONFIG_CMD_IDE -#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI -#define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO #define CONFIG_CMD_FDC -#define CONFIG_CMD_SCSI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_USB -#define CONFIG_CMD_MII +#define CONFIG_SCSI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_BSP -#define CONFIG_SYS_HUSH_PARSER /************************************************************** * I2C Stuff: * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address @@ -89,27 +73,20 @@ /* last 6 bits of the address */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - /*************************************************************** * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) ***************************************************************/ #define SPD_EEPROM_ADDRESS 0x50 -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /************************************************************** * Environment definitions **************************************************************/ -#define CONFIG_BAUDRATE 9600 /* STD Baudrate */ - -#define CONFIG_BOOTDELAY 5 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ - #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ @@ -118,19 +95,12 @@ #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_PREBOOT /*************************************************************** - * defines if the console is stored in the environment - ***************************************************************/ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */ -/*************************************************************** * defines if an overwrite_console function exists *************************************************************/ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_SYS_CONSOLE_INFO_QUIET /*************************************************************** * defines if the overwrite_console should be stored in the * environment **************************************************************/ -#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE /************************************************************** * loads config @@ -156,7 +126,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ #define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() @@ -180,10 +149,8 @@ #define PCI_HOST_FORCE 1 /* configure as pci host */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ -#define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ @@ -234,13 +201,10 @@ /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ #define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */ -#define CONFIG_BOARD_EARLY_INIT_F - /* Configuration Port location */ #define CONFIG_PORT_ADDR 0xF4000000 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in On Chip SRAM) */ @@ -317,36 +281,19 @@ /************************************************************ * DISK Partition support ************************************************************/ -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION /* Experimental */ - -/************************************************************ - * Keyboard support - ************************************************************/ -#define CONFIG_ISA_KEYBOARD /************************************************************ * Video support ************************************************************/ -#define CONFIG_VIDEO /*To enable video controller support */ -#define CONFIG_VIDEO_CT69000 -#define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */ /************************************************************ * USB support ************************************************************/ #define CONFIG_USB_UHCI -#define CONFIG_USB_KEYBOARD -#define CONFIG_USB_STORAGE /* Enable needed helper functions */ -#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ /************************************************************ * Debug support @@ -360,12 +307,4 @@ ************************************************************/ #define CONFIG_BZIP2 1 -/************************************************************ - * Ident - ************************************************************/ -#define VERSION_TAG "released" -#define CONFIG_ISO_STRING "MEV-10066-001" -#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG - - #endif /* __CONFIG_H */