X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPIP405.h;h=1f5b9f045fb62f65a8c4a2d5123e3bbe382027ae;hb=5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f;hp=e7c7a990f4c6da6dc0fdfbc02d7ee6e47a32f094;hpb=3fc304b8d77ce6646d38ae506e9fae74b9975631;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index e7c7a99..1f5b9f0 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -37,17 +37,11 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IDE
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FDC
 #define CONFIG_SCSI
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_BSP
 
 /**************************************************************
  * I2C Stuff:
@@ -81,17 +75,14 @@
  ***************************************************************/
 #define SPD_EEPROM_ADDRESS      0x50
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /**************************************************************
  * Environment definitions
  **************************************************************/
-#define CONFIG_BAUDRATE		9600	/* STD Baudrate */
 
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME	-10	/XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check console even if bootdelay = 0 */
 
 #define CONFIG_BOOTCOMMAND	"diskboot 400000 0:1; bootm" /* autoboot command		*/
 #define CONFIG_BOOTARGS		"console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
@@ -100,19 +91,12 @@
 #define CONFIG_SERVERIP		10.0.0.1
 #define CONFIG_PREBOOT
 /***************************************************************
- * defines if the console is stored in the environment
- ***************************************************************/
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
-/***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
  **************************************************************/
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /**************************************************************
  * loads config
@@ -161,10 +145,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* configure as pci-host	*/
-#define CONFIG_PCI_PNP			/* pci plug-and-play		*/
 					/* resource configuration	*/
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
@@ -215,8 +197,6 @@
 /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
 #define FLASH_SIZE_PRELIM	 3  /* maximal flash FLASH size bank #0	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR	0xF4000000
 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
@@ -266,7 +246,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	0	/* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x200	/* alternate register offset */
 
-#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET		/* reset for ide supported...	*/
 #define CONFIG_IDE_RESET_ROUTINE	/* with a special reset function */
@@ -297,31 +276,19 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
  * Video support
  ************************************************************/
-#define CONFIG_VIDEO			/*To enable video controller support */
-#define CONFIG_VIDEO_CT69000
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_ONBOARD		/* Video controller is on-board */
 
 /************************************************************
  * USB support
  ************************************************************/
 #define CONFIG_USB_UHCI
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_STDIO_DEREGISTER		/* needs stdio_deregister */
 
 /************************************************************
  * Debug support
@@ -335,11 +302,4 @@
  ************************************************************/
 #define CONFIG_BZIP2		1
 
-/************************************************************
- * Ident
- ************************************************************/
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10066-001"
-#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-
 #endif	/* __CONFIG_H */