X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FPCIPPC6.h;h=10b81c1a7f305146ba3ebea23d41c705b2cc9761;hb=d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8;hp=bc6748044971d5b1696047ad0df723e79b515c66;hpb=e365c43d6aa69b544a8f81d68596e89e9a3d6fa8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index bc67480..10b81c1 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -43,16 +43,21 @@
 
 #define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfff00000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1
 #define CONFIG_MISC_INIT_R	1
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
 
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
 /*
  * BOOTP options
  */
@@ -92,9 +97,6 @@
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
@@ -119,7 +121,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
 #define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
@@ -138,13 +140,9 @@
  * Definitions for initial stack pointer and data area
  */
 
-/* Size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE    128
-
 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -240,14 +238,6 @@
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
@@ -255,7 +245,6 @@
 
 #define CONFIG_WATCHDOG
 
-#define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */