X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP2041RDB.h;h=9cd3a7cb34d7118233422a6f6425d11457298556;hb=842033e6964e9e5d34aca893c1845416dd8ac2cc;hp=31696655bbe242ade826348fd4dc51c6174eb135;hpb=1c27059a2f7158a9c9a8778535b030935d75179d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 3169665..9cd3a7c 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -34,6 +34,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
@@ -202,15 +204,21 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* Set the local bus clock 1/8 of platform clock */
 #define CONFIG_SYS_LBC_LCRR		LCRR_CLKDIV_8
 
-#define CONFIG_SYS_FLASH_BASE		0xe8000000	/* Start of PromJet */
+/*
+ * This board doesn't have a promjet connector.
+ * However, it uses commone corenet board LAW and TLB.
+ * It is necessary to use the same start address with proper offset.
+ */
+#define CONFIG_SYS_FLASH_BASE		0xe0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe8000000ull
+#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
 #else
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
 #define CONFIG_SYS_FLASH_BR_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+		(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
+		BR_PS_16 | BR_V)
 #define CONFIG_SYS_FLASH_OR_PRELIM \
 		((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 		 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
@@ -294,7 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
@@ -539,7 +547,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEFF40000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
@@ -552,6 +560,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_E1000
 
@@ -560,8 +569,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif	/* CONFIG_PCI */
 
 /* SATA */
+#define CONFIG_FSL_SATA_V2
+
+#ifdef CONFIG_FSL_SATA_V2
 #define CONFIG_FSL_SATA
-#ifdef CONFIG_FSL_SATA
 #define CONFIG_LIBATA
 
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
@@ -707,8 +718,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
 	"bank_intlv=cs0_cs1\0"					\
 	"netdev=eth0\0"						\
-	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"			\
-	"ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"		\
+	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
+	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"		\
 	"tftpflash=tftpboot $loadaddr $uboot && "		\
 	"protect off $ubootaddr +$filesize && "			\
 	"erase $ubootaddr +$filesize && "			\
@@ -716,7 +727,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 	"protect on $ubootaddr +$filesize && "			\
 	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
 	"consoledev=ttyS0\0"					\
-	"usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0"		\
+	"usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"		\
 	"usb_dr_mode=host\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=p2041rdb/ramdisk.uboot\0"			\