X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP2041RDB.h;h=65d3dfa0f0da9a5453205a97a8906a5cfe3204ce;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=0dcba7deeae428f5b5209d711a1ec1477f538612;hpb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 0dcba7d..65d3dfa 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -45,16 +46,14 @@
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
-#define CONFIG_ENV_OVERWRITE
-
 #if defined(CONFIG_SPIFLASH)
 #elif defined(CONFIG_SDCARD)
 	#define CONFIG_FSL_FIXED_MMC_LOCATION
-	#define CONFIG_SYS_MMC_ENV_DEV          0
 #endif
 
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(unsigned long dummy);
+#include <linux/stringify.h>
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
 
@@ -68,14 +67,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
-#endif
-
 #define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  *  Config the L3 Cache as L3 SRAM
@@ -267,14 +259,20 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
+#endif
+#define CONFIG_SYS_I2C_FSL
+
 
 /*
  * RapidIO
@@ -479,10 +477,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
 /*
- * Command line configuration.
- */
-
-/*
 * USB
 */
 #define CONFIG_HAS_FSL_DR_USB