X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP2041RDB.h;h=173f6205e08f16d090162034ebda2fb54df0eb47;hb=9591b63531fa5a34698ee7bb3800af6c4ea6ba2f;hp=ef4bb0b7b0c1d82886ca80fef639c42421d8c789;hpb=4afab30caea3211032710c4298a8839d3254e7f7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index ef4bb0b..173f620 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,31 +12,25 @@
 #define __CONFIG_H
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
+#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 /* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
-#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1			/* PCIE controller 1 */
-#define CONFIG_PCIE2			/* PCIE controller 2 */
-#define CONFIG_PCIE3			/* PCIE controller 3 */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1			/* SRIO port 1 */
@@ -44,26 +38,14 @@
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_SDCARD)
-	#define CONFIG_FSL_FIXED_MMC_LOCATION
-#endif
-
 #ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(unsigned long dummy);
 #include <linux/stringify.h>
 #endif
-#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
-#define CONFIG_BTB			/* toggle branch predition */
-
-#define CONFIG_ENABLE_36BIT_PHYS
 
 #define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
 
@@ -77,18 +59,12 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #else
 #define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
 #endif
-#define CONFIG_SYS_L3_SIZE		(1024 << 10)
-#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_DCSRBAR		0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
@@ -96,10 +72,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x52
 #define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
 
@@ -122,13 +94,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_SYS_FLASH_BR_PRELIM \
-		(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
-		BR_PS_16 | BR_V)
-#define CONFIG_SYS_FLASH_OR_PRELIM \
-		((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
-		 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
-
 #define CONFIG_FSL_CPLD
 #define CPLD_BASE		0xffdf0000	/* CPLD registers */
 #ifdef CONFIG_PHYS_64BIT
@@ -142,39 +107,26 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_LBMAP_SHIFT	4
 #define PIXIS_LBMAP_ALTBANK	0x40
 
-#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
 /* Nand Flash */
 #ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_BASE		0xffa00000
+#define CFG_SYS_NAND_BASE		0xffa00000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
+#define CFG_SYS_NAND_BASE_PHYS	0xfffa00000ull
 #else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#define CFG_SYS_NAND_BASE_PHYS	CFG_SYS_NAND_BASE
 #endif
 
-#define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CFG_SYS_NAND_BASE_LIST     {CFG_SYS_NAND_BASE}
 
 /* NAND flash config */
-#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+#define CFG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
 			       | BR_V)		       /* valid */
-#define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
+#define CFG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
 			       | OR_FCM_PGS	       /* Large Page*/ \
 			       | OR_FCM_CSCT \
 			       | OR_FCM_CST \
@@ -184,14 +136,12 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 			       | OR_FCM_EHTR)
 #endif /* CONFIG_NAND_FSL_ELBC */
 
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
@@ -207,18 +157,12 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
 
 #define CONFIG_SYS_BAUDRATE_TABLE	\
@@ -343,26 +287,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
-#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x2
@@ -379,29 +303,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR	0
 
 #define CONFIG_SYS_TBIPA_VALUE	8
-#define CONFIG_ETHPRIME		"FM1@DTSEC1"
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_HAS_FSL_MPH_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
+#define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 /*
@@ -414,13 +319,11 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 /*
  * Environment Configuration
  */
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin
 
 #define __USB_PHY_TYPE	utmi
@@ -430,7 +333,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 	"bank_intlv=cs0_cs1\0"					\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
-	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"		\
+	"ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0"		\
 	"tftpflash=tftpboot $loadaddr $uboot && "		\
 	"protect off $ubootaddr +$filesize && "			\
 	"erase $ubootaddr +$filesize && "			\