X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP2041RDB.h;h=173f6205e08f16d090162034ebda2fb54df0eb47;hb=9591b63531fa5a34698ee7bb3800af6c4ea6ba2f;hp=874910f24e3160448596c582e610c62c28dbdf95;hpb=b85d75951fe126267a29bc953ed59ed64a152288;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 874910f..173f620 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -111,23 +111,22 @@
 
 /* Nand Flash */
 #ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_BASE		0xffa00000
+#define CFG_SYS_NAND_BASE		0xffa00000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
+#define CFG_SYS_NAND_BASE_PHYS	0xfffa00000ull
 #else
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#define CFG_SYS_NAND_BASE_PHYS	CFG_SYS_NAND_BASE
 #endif
 
-#define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CFG_SYS_NAND_BASE_LIST     {CFG_SYS_NAND_BASE}
 
 /* NAND flash config */
-#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+#define CFG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
 			       | BR_V)		       /* valid */
-#define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
+#define CFG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
 			       | OR_FCM_PGS	       /* Large Page*/ \
 			       | OR_FCM_CSCT \
 			       | OR_FCM_CST \
@@ -160,14 +159,10 @@
 
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
 
 #define CONFIG_SYS_BAUDRATE_TABLE	\
@@ -310,14 +305,8 @@
 #define CONFIG_SYS_TBIPA_VALUE	8
 #endif
 
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
 #ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 /*