X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP1_P2_RDB.h;h=8c373fa248cdbb89c4b656b0fdc61f5c13d562ae;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=15bfeefa46cb5f84022cb5cab8de73464d827f60;hpb=2ff6922280025c1315c53fa2eb4ab33f0c9591de;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 15bfeef..8c373fa 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -30,33 +30,37 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_MK_P1011RDB
+#ifdef CONFIG_P1011RDB
 #define CONFIG_P1011
 #endif
-#ifdef CONFIG_MK_P1020RDB
+#ifdef CONFIG_P1020RDB
 #define CONFIG_P1020
 #endif
-#ifdef CONFIG_MK_P2010RDB
+#ifdef CONFIG_P2010RDB
 #define CONFIG_P2010
 #endif
-#ifdef CONFIG_MK_P2020RDB
+#ifdef CONFIG_P2020RDB
 #define CONFIG_P2020
 #endif
 
-#ifdef CONFIG_MK_NAND
+#ifdef CONFIG_NAND
 #define CONFIG_NAND_U_BOOT		1
 #define CONFIG_RAMBOOT_NAND		1
-#define CONFIG_RAMBOOT_TEXT_BASE	0xf8f82000
+#define CONFIG_SYS_TEXT_BASE		0xf8f82000
 #endif
 
-#ifdef CONFIG_MK_SDCARD
+#ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD		1
-#define CONFIG_RAMBOOT_TEXT_BASE	0xf8f80000
+#define CONFIG_SYS_TEXT_BASE		0xf8f80000
 #endif
 
-#ifdef CONFIG_MK_SPIFLASH
+#ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH		1
-#define CONFIG_RAMBOOT_TEXT_BASE	0xf8f80000
+#define CONFIG_SYS_TEXT_BASE		0xf8f80000
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE		0xeff80000
 #endif
 
 /* High Level Configuration Options */
@@ -74,6 +78,7 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_E1000		1	/*  E1000 pci Ethernet card*/
 #ifndef __ASSEMBLY__
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
@@ -84,6 +89,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_MP
 #endif
 
+#define CONFIG_HWCONFIG
+
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
@@ -126,9 +133,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000      /* CCSRBAR Default */
 #endif
 
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -188,7 +192,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 
 #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
 	|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -203,6 +207,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
+#define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR      0xffd00000	/* stack in RAM */
@@ -280,11 +285,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
 
 #define CONFIG_SERIAL_MULTI	1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
@@ -421,6 +428,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ETHPRIME		"eTSEC1"
 
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+/* TBI PHY configuration for SGMII mode */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
@@ -462,6 +478,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_NET
@@ -504,6 +521,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
+#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -564,13 +582,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"netdev=eth0\0"						\
 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
 	"loadaddr=1000000\0"			\
-	"bootfile=uImage\0"	\
 	"tftpflash=tftpboot $loadaddr $uboot; "			\
-		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
 	"consoledev=ttyS0\0"				\
 	"ramdiskaddr=2000000\0"			\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\