X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP1_P2_RDB.h;h=883d44e37105d2eabd596a8bb7ed821c63895134;hb=544aa66a6695790227613bf32bdf672143d5a1ad;hp=449329a08bccc620d28db0d0a5c9ef8deaa6b2c3;hpb=2bad42a0c89bd1a977c05e994ba73e4e6030f945;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 449329a..883d44e 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -148,24 +148,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_L2_SIZE		(512 << 10)
 #define CONFIG_SYS_INIT_L2_END		(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS	0xfffe00000ull
-#else
-#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR
-#endif
-							/* CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses */
-							/* CONFIG_SYS_IMMR */
+#define CONFIG_SYS_CCSRBAR		0xffe00000
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_CCSRBAR_DEFAULT	CONFIG_SYS_CCSRBAR
-#else
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
 /* DDR Setup */
@@ -411,6 +398,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_RTC_DS1337_NOOSC
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68
+
+/* eSPI - Enhanced SPI */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED		10000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -475,7 +471,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif	/* CONFIG_PCI */
 
-#define CONFIG_NET_MULTI	1
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_MII		1	/* MII PHY management */
@@ -527,8 +522,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_IS_IN_SPI_FLASH
+	#define CONFIG_ENV_SPI_BUS	0
+	#define CONFIG_ENV_SPI_CS	0
+	#define CONFIG_ENV_SPI_MAX_HZ	10000000
+	#define CONFIG_ENV_SPI_MODE	0
+	#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
+	#define CONFIG_ENV_SECT_SIZE	0x10000
 	#define CONFIG_ENV_SIZE		0x2000
 #endif
 #else
@@ -580,6 +580,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #endif
 
+#define CONFIG_HAS_FSL_DR_USB
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -588,6 +591,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
 #endif
+#endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 #define CONFIG_CMD_EXT2
@@ -616,11 +620,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
+ * have to be in the first 64 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */
+#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
@@ -638,8 +642,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #define CONFIG_HOSTNAME		P2020RDB
-#define CONFIG_ROOTPATH		/opt/nfsroot
-#define CONFIG_BOOTFILE		uImage
+#define CONFIG_ROOTPATH		"/opt/nfsroot"
+#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin/* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */
@@ -674,7 +678,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"nandfdtaddr=80000\0"		\
 	"nandimgsize=400000\0"		\
 	"nandfdtsize=80000\0"		\
-	"usb_phy_type=ulpi\0"		\
+	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"	\
 	"vscfw_addr=ef000000\0"	\
 	"othbootargs=ramdisk_size=600000\0" \
 	"usbfatboot=setenv bootargs root=/dev/ram rw "	\