X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP1023RDS.h;h=800d666ab232e36396ac52eb3111edbd07ae4d5e;hb=4c25761337570e63e9e2631a81de221e692251e3;hp=9386674974465b89480990b42378464b2bc0d5e0;hpb=1fed668b3fb9c35932f58af00ff5539239fa4e1d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 9386674..800d666 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  * Authors:  Roy Zang <tie-fei.zang@freescale.com>
  *	     Chunhe Lan <b25806@freescale.com>
@@ -299,9 +299,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -310,9 +307,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-#define CONFIG_SYS_64BIT_STRTOUL
-
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
@@ -394,15 +388,10 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_E1000		/* Defind e1000 pci Ethernet card */
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 /*
  * Environment
  */
@@ -452,6 +441,8 @@ extern unsigned long get_clock_freq(void);
 /*
  * USB
  */
+#define CONFIG_HAS_FSL_DR_USB
+#ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -464,6 +455,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -500,7 +492,7 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment Configuration
  */
-#define CONFIG_BOOTFILE		uImage
+#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	(u-boot.bin) /* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */
@@ -531,12 +523,14 @@ extern unsigned long get_clock_freq(void);
 #ifndef CONFIG_NAND
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
-#define CONFIG_SYS_FMAN_FW_ADDR		0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
 #else
-#define CONFIG_SYS_QE_FW_IN_NAND	0x1f00000
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0x1f00000
 #endif
-#define CONFIG_SYS_FMAN_FW_LENGTH	0x10000
-#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_FMAN_FW_LENGTH)
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
+#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x2