X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FP1022DS.h;h=d009913c0a7742f5f56d86cae3e2ac7d2c11aa64;hb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;hp=437111070da8076af46cbf610e7022cba8ad519f;hpb=bd5053ffa5b8162257537bdb79ba829372423096;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 4371110..d009913 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -11,7 +11,6 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_36BIT
@@ -290,7 +289,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND			1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(256 * 1024)
 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
@@ -395,7 +393,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -409,9 +406,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Video */
 
 #ifdef CONFIG_FSL_DIU_FB
@@ -446,17 +440,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #endif
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -480,11 +463,8 @@
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
 
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
@@ -556,7 +536,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_E1000			/* Define e1000 pci Ethernet card */
 #endif
 
 /* SATA */
@@ -681,20 +660,15 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #endif
 
 /*